To use a Xiaomi scooter, you first connect it to the Mi Home (Xiaomi Home) app for setup and configuration, then rely on the handlebar controls, including a mandatory kick-start, for safe riding.
How to use your Xiaomi scooter with the Mi Home app
The Mi Home (Xiaomi Home) app is the essential first step for setup, pairing, and adjusting features on your Xiaomi scooter. Download the app, then open "My devices" and tap the "+" in the upper right corner to add a new device. Pairing uses the QR code located on the label attached to the control panel, on the right side of the deck, or on the back cover of the manual. If you need the QR code later, the scooter plugin in the app contains [More functions] >> [Settings] >> [Scooter QR code] for viewing and saving a screenshot. Keep your scooter within range of wireless networks and hotspots to ensure a stable Bluetooth connection during pairing and firmware updates. For the Electric Scooter 5 Max, Xiaomi says the app supports motor locking, firmware upgrades, automatic headlight activation, hill parking function, and ambient light control.
Powering your Xiaomi scooter on and off
To power on, press the power button on the handlebar. To power off, press and hold the power button for a few seconds until the display turns off. This procedure is consistent across models such as the Mi Electric Scooter, 1S, Lite, Pro 2, and 4 Pro (2nd Gen).
How to start riding and accelerate safely
- Place one foot on the deck.
- Push off with your other foot to gain initial momentum.
- Once the scooter reaches a gliding speed of 5 km/h (mandatory for models like the 1S, Lite, and Pro 2), gently press the accelerator lever with your thumb.
- Release the accelerator to coast or slow down.
The throttle will not activate below 5 km/h on these models, so the kick-start procedure is required. Always start on a flat, open surface to maintain balance.
Braking and adjusting ride settings
- To brake, release the accelerator and gently squeeze the brake lever on the handlebar.
- Use the app to enable or adjust energy recovery intensity. Xiaomi says to enable energy recovery intensity by connecting the scooter to the Mi Home/Xiaomi Home app and scrolling down to the bottom of the scooter plugin. Connect the scooter to the Mi Home/Xiaomi Home app, scroll to the bottom of the scooter plugin, and set energy recovery to weak, medium, or strong.
- Cruise mode is off by default. Enable it through the app; after enabling, hold the throttle steady for 5 seconds until a beep sounds, then release to maintain speed.
These settings allow you to customize how the scooter decelerates and how much regenerative braking energy it captures, which can extend range.
Getting help and troubleshooting
Xiaomi says customer support, service, and spare parts requests should go through Xiaomi customer support via the official website or the Xiaomi Home app for the Electric Scooter 4 Pro and related manuals. For customer support, service, or spare parts requests, contact Xiaomi through the official website or the Xiaomi Home app. If you experience pairing issues, locate the scooter's QR code via the app path [More functions] >> [Settings] >> [Scooter QR code] to re-scan.
Frequently Asked Questions
How do I turn on the Xiaomi scooter?
Press the power button on the handlebar. The display will light up, and you will hear a confirmation beep on some models.
Can I ride my Xiaomi scooter in the rain?
Xiaomi scooters are built to withstand light rain and splashes but are not fully waterproof. Avoid riding in heavy rain or submerging the scooter, and dry it before charging or storing.
What is the maximum speed of my Xiaomi scooter?
Maximum speed varies by model; most reach between 15 and 20 mph (24-32 km/h). Always check your model’s app or manual for the exact limit.
How long does the battery last on a full charge?
Battery range depends on model, speed, terrain, and rider weight. Typical ranges are between 15 and 25 miles (24-40 km) per charge under normal conditions.
Why won't my scooter accelerate when I press the throttle?
On models like the 1S and Pro 2, the throttle will not activate until the scooter reaches a kick-start speed of 5 km/h. Make sure you push off with your foot before using the accelerator.
