How to connect Raycon earbuds to a Samsung phone
To connect Raycon earbuds to a Samsung phone, first ensure the earbuds are charged and in pairing mode, then enable Bluetooth on your Samsung phone and select the earbuds from the available devices list. This process works for all Raycon models and takes less than a minute once you know the steps. Pairing Wireless Earbuds and Headphones is a core skill that unlocks the full audio experience on your Galaxy device.
- To put most Raycon earbuds into pairing mode, remove both earbuds from their charging capsule; they will power on automatically and typically show alternating blue and red LED flashes.
- On your Samsung phone, swipe down from the top with two fingers to open Quick settings, then touch and hold the Bluetooth icon. Alternatively, go to Settings > Connections > Bluetooth.
- Make sure the Bluetooth toggle is switched On.
- Under "Available devices," select the name of your Raycon earbuds (e.g., "Raycon Essential Open Earbuds," "The Everyday Earbuds Pro," or "Raycon Bone Conduction").
- If a Bluetooth pairing request appears, tap "OK" to confirm.
- Listen for a confirmation tone from the earbuds, this signals a successful connection.
Your Samsung phone will remember the earbuds for future connections, so you only need to complete this setup once unless you unpair or reset them. The Bluetooth range is up to 10 meters (33 feet) or 45 feet (14 meters) depending on your specific model.
Troubleshooting Raycon connection issues
If your Raycon earbuds fail to connect, the most common culprit is auto-connection to a previously paired device. Turn off Bluetooth on other nearby devices or delete the earbuds from their Bluetooth settings to prevent this. If the earbuds do not connect, ensure they are fully charged and within range of your Samsung phone.
For persistent problems, perform a soft reset: delete the earbuds from your phone's Bluetooth settings, place both earbuds back in the capsule, and close the lid. Wait a few seconds, then reopen the lid and try pairing again as if it were the first time.
If a soft reset doesn't work, try a hard reset: place both earbuds in the capsule, close the lid for 5-10 seconds, then reopen the lid to put them into fresh pairing mode. After any reset, re-pair the Raycon earbuds as if it's a first-time setup.
The Everyday Earbuds Pro reset method
For The Everyday Earbuds Pro specifically, the reset process is different. For 'The Everyday Earbuds Pro', a reset involves deleting them from Bluetooth settings, placing them in the capsule, holding the center Reset button for 5 seconds until the capsule LED flashes yellow 3 times, then closing the capsule.
Managing your connection
To unpair Raycon earbuds from a Samsung phone, go to 'Settings' > 'Connections' > 'Bluetooth', tap the Settings icon next to the earbuds' name, and then select 'Unpair'. This removes the device from your phone's memory and prevents auto-connection.
Some Raycon earbuds, such as the Essential Open Earbuds, Everyday Earbuds Pro, Everyday Clip Earbuds, and Bone Conduction Headphones, support Multipoint connectivity, allowing them to connect to two devices simultaneously. This allows them to connect to two devices simultaneously, so you can switch between your Samsung phone and a laptop or tablet without re-pairing.
Frequently Asked Questions
Can I use Raycon earbuds with a Samsung Galaxy tablet?
Yes, Raycon earbuds work with Samsung Galaxy tablets. The pairing process is identical: enable Bluetooth on the tablet, put the earbuds in pairing mode, and select them from the available devices list.
Do I need a special app to connect Raycon earbuds to my Samsung phone?
No app is required. The connection is handled entirely through your Samsung phone's Bluetooth settings, so you can pair directly without downloading anything.
Why do my Raycon earbuds keep disconnecting and reconnecting?
This usually happens when the earbuds are out of range or when another device interrupts the connection. Keep your phone within 10 meters of the earbuds, and turn off Bluetooth on other devices that might be trying to connect. If the problem persists, perform a soft reset as described above.
Can I connect Raycon earbuds to two Samsung devices at the same time?
Only if your specific model supports Multipoint. Check your user manual for Multipoint support, models like the Essential Open Earbuds and Everyday Earbuds Pro can maintain simultaneous connections to two devices, while others require unpairing from one device before pairing to another.
