Are you looking to open up the atomic waterproof case for your iPhone 6S+? Look no further! In this article, we will guide you through the step-by-step process of opening up the atomic waterproof case, ensuring that you can access your phone without compromising its protection. Whether you need to clean the case, replace a part, or simply inspect the interior, understanding how to safely open the case is essential. Our comprehensive guide will provide you with all the information you need, from the tools required to the precautions you should take. So, let’s dive in and learn how to open up the atomic waterproof case for your iPhone 6S+!
Inside This Article
- Tools Required
- Step 1: Removing the Charging Port Seal
- Step 2: Removing the Backplate
- Step 3: Opening the Case
- Step 4: Accessing the iPhone
- Step 5: Reassembling the Case
- Conclusion
- FAQs
Tools Required
Before you begin opening up the Atomic Waterproof Case for your iPhone 6S+, make sure you have the following tools on hand:
1. Small Phillips-head screwdriver: This tool will be needed to remove the screws holding the case together.
2. Plastic opening tool: A plastic opening tool is essential for prying open the case without scratching or damaging the surface of your iPhone.
3. Tweezers: Tweezers can be useful for delicately handling small components or removing any debris from inside the case.
4. Clean cloth or microfiber cloth: It’s always a good idea to have a clean cloth or microfiber cloth handy to wipe down the case and ensure a clear view during the process.
5. Isopropyl alcohol or screen cleaning solution: If the case is dirty or has fingerprints, using isopropyl alcohol or a screen cleaning solution can help remove any grime and restore the transparency of the case.
Remember to handle these tools with care and exercise caution while opening up the Atomic Waterproof Case for your iPhone 6S+. By having the right tools at your disposal, you can ensure a smooth and successful disassembly process.
Step 1: Removing the Charging Port Seal
Before we can successfully open up the Atomic Waterproof Case for iPhone 6S +, we need to start by removing the charging port seal. This seal is designed to protect the charging port from water and dust, ensuring the longevity and functionality of your device.
To begin, make sure you have all the necessary tools handy. You will need a small flat-head screwdriver and a pair of tweezers. These tools will make it easier to pry open the seal without causing any damage to the case or the charging port.
Start by examining the charging port seal closely. You will notice that it is a thin, rubbery material that surrounds the charging port area. Gently insert the flat-head screwdriver into the small gap between the seal and the case, and carefully pry the seal outwards.
As you pry the seal, you may encounter some resistance. Be patient and apply gentle pressure to avoid any tearing or snapping of the seal. Take your time and slowly work your way around the seal, releasing it from the adhesive that holds it in place.
Once the seal is completely loosened, use the tweezers to grip the edge of the seal and pull it out of the case. Be careful not to yank it forcefully, as this can damage the seal or cause it to break apart. Slow and steady is the key here.
After removing the charging port seal, take a moment to inspect it for any signs of damage or wear. If you notice any tears or cracks, it is recommended to replace the seal with a new one to maintain the case’s waterproof capabilities.
With the charging port seal successfully removed, you are now one step closer to accessing the inner components of the Atomic Waterproof Case for iPhone 6S +. Let’s move on to the next step, where we’ll learn how to remove the backplate.
Step 2: Removing the Backplate
Now that you have successfully removed the charging port seal in Step 1, it’s time to move on to the next step – removing the backplate of the Atomic Waterproof Case for iPhone 6S+. This step is crucial as it will allow you to gain access to the inner components of your device and ensure a smooth installation of any accessories you might need.
Before you proceed, make sure you have the following tools ready:
- Small Phillips screwdriver
- Plastic opening tool/spudger
Once you have gathered the tools, let’s get started with removing the backplate:
- Using the small Phillips screwdriver, carefully remove the screws located on the bottom of the case. There are generally two screws on each side of the charging port.
- Once the screws are removed, take the plastic opening tool/spudger and gently insert it into the small gap between the backplate and the case. Apply slight pressure to pry the backplate away from the case.
- Work your way around the edges of the case, gently prying the backplate off. Take care not to apply too much force as it may damage the case or your device.
- As you continue to separate the backplate from the case, you may hear some clicking sounds. This is normal and indicates that the backplate is detaching from the case.
Once the backplate is completely detached, set it aside in a safe place. You can now proceed to the next step, which is opening the case itself to access your iPhone 6S+.
Step 3: Opening the Case
Now that you have successfully removed the charging port seal and the backplate, it’s time to open up the Atomic Waterproof Case for your iPhone 6S+. Opening the case requires careful attention to detail to prevent any damage to your phone or the case itself.
First, locate the small indentation on one side of the case. This is where you will insert a plastic opening tool or a thin guitar pick. Gently insert the tool into the indentation and slowly begin to pry open the case. Be patient and take your time to ensure a smooth and controlled opening.
As you start to separate the two halves of the case, you may hear some clicking or snapping sounds. This is normal and is simply the result of the case’s locking mechanism being disengaged. Keep applying gentle pressure and work your way around the edges of the case, gradually releasing the clips that hold it together.
Once you have successfully opened the case, be cautious around the rubber gasket that seals the case. This gasket is crucial for maintaining the waterproof and dustproof capabilities of the Atomic Case. Avoid pulling or stretching the gasket excessively.
As you open the case, you may notice some resistance due to the tight seal created by the gasket. If you encounter this, try gently wiggling the case back and forth while continuing to apply pressure. This can help loosen the seal and make it easier to open the case entirely.
With the case fully opened, you now have access to your iPhone 6S+ within the Atomic Waterproof Case. Be sure to handle your phone with care and avoid touching any of the internal components or connectors.
Remember that when you’re done with accessing your iPhone, you will need to carefully close the case to maintain its waterproof and dustproof integrity.
Proceed to Step 4 to learn how to access your iPhone within the case.
Step 4: Accessing the iPhone
After successfully opening the Atomic Waterproof Case for your iPhone 6S+, it’s time to access your device. Follow these simple steps to safely retrieve your iPhone:
1. Detach the rubberized seal: Start by carefully removing the rubberized seal surrounding the edges of the case. This seal ensures that your iPhone remains securely protected from water and dust. Use your fingers or a small flat-headed screwdriver to gently lift and detach the seal.
2. Lift the protective foam padding: Underneath the rubberized seal, you will find a layer of protective foam padding. Gently lift and remove this padding to reveal the inner compartment of the case.
3. Locate the locking mechanism: The Atomic Waterproof Case is designed with a locking mechanism to ensure the utmost protection for your iPhone. Look for the locking tabs or latches that hold the case securely closed. They are usually located on the sides or corners of the case.
4. Release the locking tabs or latches: Depending on the specific model of the Atomic Waterproof Case, you may need to slide or press the locking tabs or latches to release them. Be cautious and refer to the manufacturer’s instructions if necessary. Once released, the case will start to open up, allowing you to access your iPhone.
5. Carefully remove your iPhone: With the locking mechanism released, you can now carefully remove your iPhone from the case. Take a gentle grip on your device and slide it out from the compartment. Be mindful of any cables or connectors that might be attached to your iPhone.
6. Check for any damages: Once you have retrieved your iPhone from the Atomic Waterproof Case, inspect it for any signs of damage. Look for water or dust accumulation, as well as any scratches or cracks. If you notice any issues, it is advisable to contact the manufacturer for further assistance.
7. Clean and dry your iPhone: Before reassembling the case, ensure that your iPhone is clean and dry. Use a microfiber cloth or a soft, lint-free cloth to gently wipe off any dirt or moisture. It’s crucial to keep your device in optimal condition for its longevity.
By following these steps, you can successfully access your iPhone within the Atomic Waterproof Case. Remember to handle your device with care and take necessary precautions to prevent any accidental damages.
Step 5: Reassembling the Case
After successfully accessing your iPhone in the previous steps, it’s time to put everything back together and reassemble the Atomic Waterproof Case for your iPhone 6S+. Follow these steps to ensure a secure and proper reassembly:
1. Begin by carefully aligning the backplate of the case with the openings and ports on your iPhone. Make sure the backplate sits flush against the edges of your device.
2. Once the backplate is aligned correctly, gently press down on all sides to secure it in place. Be cautious not to apply excessive force, as this may damage the case or your iPhone.
3. Next, locate the charging port seal that you previously removed. Position it carefully and ensure it fits snugly into the charging port opening on the case. Press it firmly to create a watertight seal.
4. If your Atomic Waterproof Case came with any additional inserts, such as a screen protector or lens cover, now is the time to attach them. Follow the manufacturer’s instructions to install these accessories correctly.
5. Finally, inspect the entire case to ensure that all buttons and ports are properly aligned and functional. Take a moment to press each button and test the responsiveness of the Touch ID sensor, if applicable.
With the case fully reassembled, you can now enjoy the benefits of ultimate protection for your iPhone 6S+ again. Whether you’re swimming, hiking, or simply want to safeguard your device against accidental spills, the Atomic Waterproof Case ensures that your phone remains safe and dry.
Remember to periodically check the seals and overall condition of the case to maintain its integrity. If you notice any signs of wear or damage, it may be time to consider replacing your Atomic Waterproof Case to guarantee the continued protection of your iPhone.
By following these steps and properly reassembling your Atomic Waterproof Case for the iPhone 6S+, you can continue to enjoy the flexibility and functionality of your device without compromising its safety and durability.
Conclusion
In conclusion, the Atomic Waterproof Case for iPhone 6S+ is a must-have accessory for those who want to protect their valuable device from water damage. With its innovative design and durable construction, this case offers reliable waterproof protection without compromising on style or functionality. Whether you’re heading to the beach, going on a hiking adventure, or simply want to take underwater photos, this case will keep your iPhone safe and secure. Its easy installation and access to all ports and buttons make it a convenient choice for daily use. So, don’t let water worries stop you from enjoying your iPhone to the fullest. Get the Atomic Waterproof Case today and have peace of mind knowing your phone is protected from the elements.
FAQs
1. How do I open the Atomic Waterproof Case for iPhone 6S Plus?
To open the Atomic Waterproof Case for iPhone 6S Plus, locate the latches on the sides of the case and slide them downwards simultaneously. This will release the lock mechanism and allow you to remove the top portion of the case. Once the top is removed, you can access your iPhone 6S Plus and remove it from the case.
2. Is it necessary to open the case regularly to clean it?
While it’s not necessary to open the case regularly for cleaning, it’s recommended to inspect and clean the case from time to time to ensure optimal performance. Wiping the interior with a soft, lint-free cloth and using a mild cleaning solution can help remove any dirt or grime that may have accumulated over time.
3. Can I still use the touchscreen and other iPhone features while the phone is in the Atomic Waterproof Case?
Absolutely! The Atomic Waterproof Case is designed to allow full functionality of your iPhone while providing excellent protection. You can easily access the touchscreen, use the cameras, and even make calls without any hindrance. The case is equipped with precise cutouts that allow access to all ports and buttons.
4. Will the Atomic Waterproof Case protect my iPhone 6S Plus from drops and impacts?
Yes, the Atomic Waterproof Case offers not only waterproof capabilities but also provides reliable protection against drops and impacts. It is specifically designed to withstand shocks, making it an ideal companion for outdoor activities and adventures. The case is constructed from durable materials that absorb and disperse impact, safeguarding your iPhone from damage.
5. How deep can I submerge my iPhone 6S Plus in water with the Atomic Waterproof Case?
The Atomic Waterproof Case for iPhone 6S Plus is designed to withstand submersion in water up to 6 feet (2 meters) for up to 30 minutes. This makes it perfect for activities such as swimming, snorkeling, and even shallow diving. However, it’s important to note that the case is not intended for prolonged exposure to deep water or extreme water pressure, such as scuba diving.
