How To Remove IPhone 6 Waterproof Case

Mobile Accessories

Welcome to our guide on how to remove the waterproof case from your iPhone 6! If you’re the proud owner of an iPhone 6 and have been using a rugged, waterproof case to keep your device protected, you may find yourself wondering how to safely remove it. Removing a waterproof case can be a bit trickier than a regular case, but with the right techniques, it can be easily accomplished. With our step-by-step instructions, you’ll be able to remove the waterproof case from your iPhone 6 without any hassle or risk of damage to your device. So, let’s get started and learn how to take off that waterproof case!

Inside This Article

  1. Step 1: Gather Necessary Materials
  2. # Step 2: Prepare the iPhone 6
  3. Step 3: Remove the Case
  4. # Step 4: Clean and Dry the iPhone 6
  5. # Step 5: Reassemble the iPhone 6
  6. Conclusion
  7. FAQs

Step 1: Gather Necessary Materials

In order to successfully remove the waterproof case from your iPhone 6, you will need to gather a few essential materials. Having these items on hand will make the process much smoother and ensure that you can safely remove the case without causing any damage to your device. Here are the necessary materials you will need:

1. Small Screwdriver: You will need a small screwdriver, preferably one with a Phillips head. This will be used to unscrew any screws that may be holding the case in place. Make sure the size of the screwdriver matches the screws on your case.

2. Soft Cloth: Having a soft cloth or microfiber cloth is important for protecting the surface of your iPhone 6. This will help prevent scratches or damage while removing the case.

3. Compressed Air or Dust Blower: During the removal process, there may be accumulated dust or debris inside the case. Using compressed air or a dust blower can help clean out any particles and ensure a clear and safe removal.

4. Patience: Removing a waterproof case requires patience and careful attention to detail. Take your time and follow the steps carefully to avoid any mishaps.

By gathering these necessary materials before starting the removal process, you can proceed with confidence and ensure a smooth and successful removal of the waterproof case from your iPhone 6.

# Step 2: Prepare the iPhone 6

Before you begin removing the waterproof case from your iPhone 6, it’s essential to prepare the device to ensure a smooth and safe removal process. Here are some steps to follow:

1. Power off the iPhone 6: This step is crucial to avoid any accidental damage during the case removal process. Press and hold the power button on the side or top of the device until you see the “slide to power off” option. Swipe the slider to the right to power off your iPhone.

2. Disconnect any cables or accessories: Make sure to disconnect any charging cables, headphones, or any other accessories that may be connected to your iPhone 6. This will prevent any interference or obstruction while removing the case.

3. Clean the exterior: Take a soft, lint-free cloth and gently wipe the surface of your iPhone 6. This will remove any dust, dirt, or fingerprints, ensuring a clear and clean area to work with.

4. Remove any screen protectors: If you have a screen protector applied to your iPhone 6, it’s best to remove it before attempting to remove the waterproof case. Carefully peel off the screen protector from the edges, taking care not to damage the screen.

5. Familiarize yourself with the case: Take a moment to examine the waterproof case and its design. Look for any release buttons, snaps, or screws that may hold it in place. Understanding how the case is secured will make removal easier and less risky.

6. Keep a clean and well-lit workspace: Find a well-lit area to work in, preferably with a clean and clutter-free surface. This will ensure that you have enough visibility and space to safely remove the case without losing any small parts or causing any accidental damage.

Following these steps will help you prepare your iPhone 6 for the safe removal of the waterproof case. Once you have completed these preparations, you can proceed to the next step of actually removing the case.

Step 3: Remove the Case

Removing a waterproof case from your iPhone 6 is a relatively straightforward process. Follow the steps below to safely remove the case without causing any damage to your phone:

1. Begin by locating the seam or opening of the case. Most waterproof cases have a designated area where the two halves of the case meet.

2. Use your fingernail or a small, flat tool like a plastic spudger to carefully pry open the case. Start at one corner and work your way around the edges, gently separating the two halves of the case.

3. Take your time and apply even pressure to avoid bending or warping the case. Be patient, as some cases may require a bit more effort to open than others.

4. As you separate the case, be mindful of any clips, latches, or waterproof seals that may be holding it together. Take note of their location to ensure you can easily reassemble the case later.

5. Once the case is fully opened, gently lift the iPhone 6 out of the bottom half of the case. Hold the phone firmly by the edges to prevent it from accidentally slipping out of your hands.

6. Inspect the case and the phone for any signs of dirt, debris, or moisture. If necessary, carefully clean both the case and the iPhone 6 before reassembling.

7. Congratulations! You have successfully removed the waterproof case from your iPhone 6. Now, you can proceed to clean and dry both the case and your phone before reassembling.

Remember, taking care when removing the case will help ensure the longevity of both the case and your iPhone 6. Plus, it allows you to thoroughly clean and maintain your phone, ensuring optimal performance.

# Step 4: Clean and Dry the iPhone 6

After successfully removing the waterproof case from your iPhone 6, it’s essential to take the necessary steps to clean and dry the device properly. This will help prevent any water damage and ensure that your phone continues to function optimally.

Here are some important guidelines to follow when cleaning and drying your iPhone 6:

  1. Remove any visible water: Gently shake the phone to remove any excess water that may have seeped into the device during the case removal process. This will help eliminate any standing water that could potentially damage the internal components.
  2. Use a microfiber cloth: Take a clean microfiber cloth and gently wipe the exterior of the phone to remove any moisture or residue. Make sure to pay special attention to the charging port, headphone jack, and speakers.
  3. Avoid using heat sources: While it may be tempting to use a hairdryer or direct heat source to dry the phone quickly, it’s best to avoid doing so. The excessive heat can damage the sensitive components of the iPhone 6. Instead, opt for a natural drying method.
  4. Let it air dry: Place your iPhone 6 in a dry and well-ventilated area, preferably on a clean and absorbent surface. Allow the phone to air dry naturally for a few hours. This will help evaporate any remaining moisture.
  5. Consider using silica gel packets: If you have access to silica gel packets (often found in shoeboxes or packaging), place a few packets near the phone. Silica gel is excellent at absorbing moisture and can help speed up the drying process.

Remember, patience is key when it comes to drying your iPhone 6. Rushing the process can lead to irreversible damage. It’s crucial to ensure that the phone is completely dry before reassembling it or powering it back on.

By following these steps, you’ll be able to clean and dry your iPhone 6 effectively, reducing the risk of any water-related issues and prolonging the lifespan of your device.

# Step 5: Reassemble the iPhone 6

Now that you have successfully removed the waterproof case from your iPhone 6, it’s time to reassemble it and get it back in working order. Follow these simple steps to ensure a smooth and hassle-free reassembly process:

1. Inspect the case for any signs of damage or wear. It’s important to make sure that the case is still in good condition and able to provide the necessary protection for your iPhone.

2. Check the interior of the case for any moisture or debris. If you notice any water or dirt inside, clean it thoroughly with a soft cloth or tissue. Make sure the case is completely dry before proceeding.

3. Align the iPhone 6 with the appropriate openings on the case. Take a moment to ensure everything is properly lined up before proceeding to the next step.

4. Gently press the iPhone 6 into the case, starting from the edges and working your way towards the center. Make sure the device fits snugly into the case without any gaps or loose parts.

5. Once the iPhone 6 is securely in place, carefully snap the case back together. Start at one side and work your way around, making sure all the clips and edges are aligned correctly.

6. Give the case a gentle shake to ensure it is firmly attached to the iPhone 6. If you feel any movement or hear any clicking sounds, double-check to make sure all the clips are securely engaged.

7. Test all the buttons, ports, and features of your iPhone 6 to ensure they are working properly. This includes the volume buttons, power button, charging port, and headphone jack.

8. Take a moment to appreciate your newly reassembled iPhone 6, now protected by a waterproof case once again. It’s ready to be used in any outdoor or water-related activities without worrying about damage.

Remember to regularly check and clean the case as needed to maintain its effectiveness in protecting your iPhone 6. With proper care and maintenance, your iPhone 6 and its waterproof case will continue to serve you well for a long time.


In conclusion, the iPhone 6 waterproof case is a fantastic accessory for those who want to protect their device from water damage. It provides peace of mind knowing that your iPhone is safe and secure, even in wet environments. Additionally, the case offers added durability and shock resistance, ensuring that your device remains intact even in accidental drops or impacts.

By following the step-by-step guide outlined in this article, you can easily and safely remove your iPhone 6 waterproof case when needed. Remember to always be gentle and take your time to avoid any damage to your phone or the case.

Investing in a high-quality waterproof case for your iPhone 6 is a wise decision that will extend the life of your device and give you the freedom to use it wherever you go. So, go ahead and enjoy the benefits of a waterproof case – a worry-free experience while using your iPhone 6 in any weather condition or outdoor activity!


1. Can I remove the waterproof case from my iPhone 6?
Absolutely! The waterproof case for the iPhone 6 is designed to provide optimal protection while allowing easy access to the device. To remove the waterproof case, simply follow the manufacturer’s instructions. Usually, it involves releasing the latches or snaps and gently sliding the case off the phone.

2. Is there a specific tool or technique I need to remove the iPhone 6 waterproof case?
No special tools or techniques are typically required to remove the waterproof case from your iPhone 6. Most waterproof cases are designed to be user-friendly and can be easily removed without the need for additional tools. However, it’s always a good idea to consult the manufacturer’s instructions for any specific guidelines they may provide.

3. Will removing the waterproof case affect the functionality of my iPhone 6?
Removing the waterproof case should not affect the functionality of your iPhone 6. These cases are specifically designed to provide protection while still allowing full access to the device’s features and functions. However, it’s important to handle the removal process with care and avoid any excessive force or mishandling that could potentially damage your phone.

4. Are there any precautions I need to take while removing the waterproof case?
While removing the waterproof case, it’s always a good idea to ensure your hands are clean and dry to prevent any dirt or moisture from entering the phone. Additionally, it’s advisable to remove the case in a controlled environment, such as a clean, well-lit area, to minimize the risk of accidental drops or damage to the phone. Following these precautions can help maintain the integrity of your device.

5. Can I reuse the waterproof case once it’s been removed?
In most cases, waterproof cases can be reused after they have been removed from the phone. However, it’s important to inspect the case for any signs of wear or damage and ensure that it is still capable of providing the necessary waterproof protection. If there are any visible cracks, tears, or other defects, it’s recommended to replace the case to maintain the waterproof functionality.