To pair Jib True wireless earbuds, remove both earbuds from the charging case, manually power them off, then perform the documented 10-second reset before selecting Jib True from your phone’s Bluetooth menu. This exact sequence, not a generic Bluetooth scan, is what makes pairing true wireless earbuds reliable on the first attempt.
Before you pair your Jib True wireless earbuds
Check the package contents first. You should have the Jib True earbuds themselves, the charging case, a USB charging cable, additional ear tips for a secure fit, and the user manual with warranty information. Confirm all items are present before charging.
Fully charge the earbuds and the case before pairing. Plug the USB cable into the charging port on the back of the case and connect it to a power source. The LED indicators on the front of the case and on the earbuds will show charging status, blinking while charging and solid when complete. Charging the earbuds and case fully ensures you have enough battery to complete the pairing process without interruption.
How to pair Jib True wireless earbuds
The documented pairing sequence for the Jib True requires a specific reset and sync process. Follow these steps in order:
- Remove both earbuds from the charging case.
- Manually power both earbuds off by touching and holding the button on each bud for 4 seconds.
- Touch and hold the button on each bud for 10 seconds to reset them. This power-cycles the buds on and off again.
- Place both earbuds back in the charging case until both LEDs show red.
- Remove the earbuds from the case again. They will power on automatically, and the LEDs will flash blue while they sync to each other.
Wait until the earbuds finish syncing to each other before moving to the next step. The blue flashing LED indicates the sync process is active. Do not attempt to connect to your phone until the earbuds have completed their internal pairing.
Connect the earbuds to your phone
Once the earbuds have synced, turn on Bluetooth on your phone. The Jib True connects to one device at a time, so make sure your phone is the only device attempting to pair.
On Android
- Open the Bluetooth settings on your Android device.
- Tap + Pair New Device.
- Select Jib True from the list of available Bluetooth devices.
- Accept the Pair and Ok prompts if they appear.
On iPhone or other devices
- Open the Bluetooth settings on your iPhone or other device.
- Wait for Jib True to appear in the list of available devices.
- Select Jib True to initiate the connection.
- Accept any pairing prompts that appear on your screen.
Skullcandy documents this process for Android devices and instructs iPhone and other device users to use the phone’s Bluetooth list. The support page does not specify a minimum iOS or Android version, and there is no app-based pairing documented for this model.
Test the connection and troubleshoot
After connecting, play audio from your phone to test both earbuds. Check for balanced sound between the left and right buds and confirm there is no static or intermittent dropouts. If the audio is uneven, reposition the earbuds in your ears to ensure a snug fit.
If pairing fails, repeat the full reset sequence: power off both buds by holding the button for 4 seconds, then hold for 10 seconds to reset, place them back in the case until both LEDs show red, and remove them again. Wait for the blue flashing sync LEDs before attempting a new Bluetooth connection on your phone.
Note that the Jib True does not support multipoint or multi-device pairing. The earbuds sync to each other first, then you select one Bluetooth device connection from your phone’s menu. If you have previously paired the earbuds with another phone, that device may need to be disconnected or have Bluetooth turned off before the Jib True will appear on your current phone.
Frequently Asked Questions
Can I use the Jib True earbuds with a laptop or tablet?
Yes, the Jib True can pair with any Bluetooth-enabled device that supports audio output, including laptops, tablets, and Bluetooth audio players. Use the same process: put the earbuds in pairing mode, then select Jib True from that device’s Bluetooth menu.
How do I know when the earbuds are fully charged?
The LED indicators on the earbuds will turn solid when charging is complete. The charging case also has LED indicators on the front that show charging status. You can check individual earbud battery levels by opening the case and looking at the LEDs on each bud.
Can I use just one earbud at a time?
Yes, the Jib True supports mono mode, which allows you to use either earbud individually. This is useful for sharing audio with a friend or for taking calls with a single bud in while keeping the other ear free.
What should I do if only one earbud is playing audio?
Place both earbuds back in the charging case, wait for the LEDs to show red, then remove them together. This forces the buds to re-sync to each other before connecting to your phone. If the issue persists, repeat the full 10-second reset process.
Are the Jib True earbuds sweat-resistant?
The Jib True earbuds are designed for sports and workouts with a secure-fit design and sweat-resistant construction. The included ear tips help maintain a stable fit during vigorous activity, and the buds are built to withstand moisture from exercise.
