To connect an ATUMTEK selfie stick, extend and lock the telescopic pole, turn on the Bluetooth remote, then pair your phone to the remote named “ATUMTEK” from your phone’s Bluetooth settings. Once paired, the remote button works as a shutter in your phone’s native camera app.
Before you connect your ATUMTEK selfie stick
Your phone must run iOS 7.0 or Android 5.0 or later to be compatible with the ATUMTEK Bluetooth remote. The remote has a 50mAh rechargeable battery, so make sure it is charged before your first use. The phone holder on the stick can accommodate phones up to about 3.42 inches wide, though this figure comes from a reseller review, not ATUMTEK’s own support page, so treat it as a cautious guideline.
Step 1: Adjust the selfie stick and mount your phone
- Extend the telescopic pole to your desired length by pulling each section out gently.
- Lock the sections in place using the twist or lever lock mechanism until they are secure.
- Open the phone holder, place your phone inside so it is centered, then tighten the clamp firmly to hold the phone securely.
Step 2: Pair the ATUMTEK remote with your phone
- Turn on the Bluetooth remote by pressing and holding the shutter button for about 2 seconds until the green LED flashes, which means it is in pairing mode.
- On your phone, open Bluetooth settings and search for available devices.
- Select “ATUMTEK” from the list to pair. If your phone shows “connecting/pairing,” press the remote button continuously and quickly until the connection completes.
- When pairing succeeds, the remote’s indicator light becomes solid.
On iPhone
Go to Settings, turn on Bluetooth, and pair with “ATUMTEK” from the list of discovered devices.
On Android
Open Bluetooth settings, search for devices, and pair with “ATUMTEK.”
Step 3: Take a photo or video with the remote
- Open your phone’s native camera app after pairing is complete.
- Press the remote button to take a photo. The remote button acts as the shutter.
- To switch to video, select “Video” in the phone’s camera function before using the remote button to start and stop recording.
Troubleshooting connection and shutter problems
Remote does not trigger the shutter
Check your camera app’s volume-key setting. For some phones, set 'Volume key function' to 'Shutter' under 'Shooting methods' in settings. Once changed, the remote button should work as a shutter.
Bluetooth pairing fails
Remove and reinsert the remote’s battery or recharge it, then try pairing again from the phone’s Bluetooth settings. If the indicator light does not flash, the remote is not in pairing mode, press and hold the shutter button until it flashes. If the phone shows “connecting/pairing,” press the remote button continuously and quickly to complete the link.
Frequently Asked Questions
Can I use the ATUMTEK selfie stick for videos?
Yes. After pairing, open your camera app, switch to video mode, and use the remote button to start and stop recording.
Does the ATUMTEK selfie stick require a separate app?
No. It works with your phone’s native camera app or any third-party camera app you prefer.
How do I charge the ATUMTEK remote?
The remote has a built-in rechargeable battery. Charge it using a USB cable connected to a computer or wall adapter.
How do you use a selfie stick to get the best shots?
To use a selfie stick effectively, extend it to the right length, lock the sections, and hold the handle steady while pressing the remote shutter. Experiment with angles and use the timer if you want to include yourself in group shots.
Can I mount a GoPro to selfie stick?
To mount GoPro to selfie stick, you need an adapter or a holder that fits the GoPro’s mounting system. The ATUMTEK stick’s phone holder is designed for smartphones, not GoPro cameras, so a separate adapter is required.
