To connect a Yunteng selfie stick, you pair its Bluetooth remote with your phone. The process is the same whether you want to use a selfie stick for solo travel shots or group photos: turn on the remote, enable Bluetooth on your phone, and select the Yunteng device from the list.
How to connect a Yunteng selfie stick to your phone
Connecting a Yunteng selfie stick is done entirely through Bluetooth. Before you begin, ensure the remote control has a charged battery and that your phone is compatible. Once paired, the remote lets you take photos without touching your phone's screen.
Connecting to an iPhone
- Turn on the remote control using the ON/OFF switch.
- Wait for the indicator light to blink. This means the remote is in pairing mode.
- On your iPhone, go to Settings > General > Bluetooth and ensure Bluetooth is enabled.
- From the list of available devices, select "YUNTENG", "Yunteng", or a similar listed name.
- When pairing succeeds, the light stops flashing or the phone shows Connected.
Connecting to an Android phone
- Wait for the indicator light to blink.
- On your Android phone, go to Settings > Bluetooth and turn Bluetooth on.
- Search for new or available devices.
- Select "YUNTENG" or "YT-1288" from the list.
- After pairing, the light stops flashing or stays solid.
Phone compatibility requirements
The exact iOS and Android version requirements vary by Yunteng model and manual. One manual documents compatibility with iOS 5.0 or later and Android 4.2 or later. Another manual specifies iOS 6.0 or newer and Android 4.2.2 or newer. Always check your specific model's documentation for the exact requirements.
Mounting your phone and taking a photo
- Secure your phone in the adjustable spring-loaded clamp at the top of the monopod. Make sure the phone is centered and held firmly.
- Open your phone's camera app.
- Press the remote shutter button to capture a photo. Some manuals indicate the remote can also start or stop video recording with the appropriate button, though the exact button name varies by model.
Adjusting the selfie stick length
Extend the monopod to your desired length. After extending the arm, lock the phone at the correct angle.
Troubleshooting connection problems
- If the remote does not pair, confirm the power switch is on and the indicator light is blinking.
- Make sure Bluetooth is enabled on your phone and search again for "YUNTENG" or the model name.
- If pairing fails, check the remote battery first. A low battery is a common cause of connection issues.
Frequently Asked Questions
Can I use the Yunteng selfie stick with an action camera or digital camera?
Some Yunteng models, like the YT-1288, include support for action cameras and digital cameras. However, the exact supported camera list varies by model and manual, so check your specific product documentation.
Does the remote have a zoom function?
One source notes that iPhone iOS systems do not have a zoom function in this setup, but this is not confirmed across all manuals. The primary function of the remote is to trigger the shutter.
What if my phone doesn't show "YUNTENG" in the Bluetooth list?
Ensure the remote is in pairing mode with the indicator light blinking. If it still does not appear, try turning Bluetooth off and on again on your phone, or restart your phone. If the problem persists, check the remote's battery.
How do I know when the remote is successfully paired?
When pairing succeeds, the indicator light on the remote stops flashing or stays solid. Your phone may also display "Connected" next to the device name in the Bluetooth settings.
