How To Make A Stylus More Sensitive?

Mobile Accessories

Are you struggling with a less responsive stylus for your mobile device? Don’t worry, we’ve got you covered! In this article, we will explore how to make your stylus more sensitive, allowing for a smoother and more accurate touch experience. Whether you’re an artist looking to create precise digital drawings or simply someone who wants to navigate your phone with ease, these tips and tricks will help improve your stylus sensitivity. From adjusting settings on your device to choosing the right stylus tips, we’ll provide you with practical solutions to enhance your mobile accessory. So, let’s dive in and unlock the full potential of your stylus!

Inside This Article

  1. Calibration of the Stylus
  2. Adjusting the Sensitivity Settings on Your Device
  3. Using a Conductive Material
  4. Cleaning the Stylus Tip
  5. Conclusion
  6. FAQs

Calibration of the Stylus

Calibration is a process that involves optimizing the accuracy and responsiveness of a stylus on a touch screen device. If your stylus is not as sensitive as you’d like it to be, calibrating it can help improve its performance. Here are some steps you can take to calibrate your stylus:

1. Locate the settings: Go to the settings menu on your device and look for the “stylus” or “pen” section. The exact location may vary depending on your device model and operating system.

2. Access the stylus settings: Once you have found the stylus section, open it to access the settings specifically related to the stylus.

3. Find the calibration option: Look for an option labeled “calibrate” or “stylus calibration.” This option allows you to fine-tune the sensitivity and accuracy of your stylus.

4. Follow the on-screen instructions: Once you have found the calibration option, your device will guide you through the calibration process. Typically, this involves tapping certain points on the screen or following a set of instructions to align the stylus with specific markers.

5. Test and adjust: After completing the calibration process, test your stylus to see if the sensitivity has improved. If you’re still not satisfied with the results, you can repeat the calibration process or try adjusting the sensitivity settings on your device.

Remember, calibration options and steps may vary depending on your device, so it’s always a good idea to consult your device’s user manual or the manufacturer’s website for detailed instructions specific to your model.

Adjusting the Sensitivity Settings on Your Device

If you’re looking to make your stylus more sensitive, one effective way to achieve this is by adjusting the sensitivity settings on your device. Most mobile devices that support stylus input, such as smartphones and tablets, offer built-in options to customize the sensitivity of the stylus.

To access the sensitivity settings on your device, begin by opening the settings menu. The location of these settings may vary depending on the make and model of your device, but you can typically find them under the “Pen & Touch” or “Stylus” section.

Once you’ve located the sensitivity settings, you’ll likely be presented with a slider or numerical scale that allows you to adjust the sensitivity level. Dragging the slider to the right will increase the sensitivity, while dragging it to the left will decrease it. Experiment with different sensitivity levels to find the one that suits your needs.

Keep in mind that increasing the sensitivity might make the stylus more responsive to lighter touches, while decreasing it can result in a more precise and controlled input. It’s a good idea to start with a conservative setting and gradually adjust it to find the right balance.

It’s worth noting that some devices may offer additional advanced settings, such as palm rejection or tip pressure sensitivity. Palm rejection helps prevent accidental touches from your hand while using the stylus, and tip pressure sensitivity allows the device to recognize different levels of pressure applied by the stylus tip.

Experimenting with these settings can further enhance your stylus experience and cater to your specific usage preferences. Play around with the options available and find the combination that works best for you.

Using a Conductive Material

If you want to make your stylus more sensitive, one effective method is to use a conductive material. This can help increase the responsiveness of the stylus and improve its performance. Here are a few options you can try:

1. Aluminum Foil: One of the easiest ways to make your stylus more sensitive is by wrapping a small piece of aluminum foil around the tip. This creates a larger surface area for the stylus to interact with the screen, resulting in improved sensitivity.

2. Conductive Fabric: Another option is to use a conductive fabric, such as a microfiber cloth or a piece of fabric coated with conductive materials. Simply wrap a small piece of the fabric around the tip of the stylus. The conductive nature of the fabric helps enhance the sensitivity of the stylus.

3. Conductive Tape: If you’re looking for a more adhesive solution, you can use conductive tape. Cut a small piece of the tape and attach it to the tip of the stylus. The conductive properties of the tape can improve the stylus’s sensitivity by creating a stronger electrical connection with the screen.

It’s important to note that while these methods can enhance the sensitivity of your stylus, they may also result in increased friction or wear and tear on the screen. Be mindful when using these materials and always test them on a small area of the screen before applying them to the entire surface.

Cleaning the Stylus Tip

Keeping the stylus tip clean is essential for maintaining its sensitivity and responsiveness. Over time, the tip can accumulate debris, such as dust, dirt, or even oil from your fingers. This buildup can interfere with the stylus’s ability to interact with your device’s touchscreen properly. Therefore, regular cleaning is necessary to ensure optimal performance.

To clean the stylus tip, start by gently removing it from the stylus body. Use a soft, lint-free cloth or a microfiber cleaning cloth to wipe away any visible dirt or smudges. Avoid using harsh chemicals or cleaners, as they can damage the tip’s surface. Instead, opt for a solution of mild soap and water, dampening the cloth slightly before wiping the tip. Make sure to wring out any excess moisture to prevent water damage.

Gently rub the cloth over the tip in a circular motion, applying slight pressure. This helps to dislodge any stubborn dirt particles. Be careful not to press too hard, as this could damage the delicate tip. If necessary, you can also use a soft-bristled toothbrush to remove any stubborn debris. Remember to clean both the tip and the surrounding area to ensure a thorough cleaning.

Once you have finished cleaning, use a dry portion of the cloth to wipe away any remaining moisture. Make sure the stylus tip is completely dry before reattaching it to the stylus body. This helps to prevent any water damage or smearing of the touchscreen when using the stylus again.

It is important to note that the frequency of cleaning may vary depending on your usage and environment. If you regularly use the stylus in dusty or dirty conditions, you may need to clean it more frequently. Similarly, if you notice a decrease in sensitivity or responsiveness, it may be a sign that the tip requires cleaning.

By regularly cleaning the stylus tip, you can ensure optimal sensitivity and improve its overall performance. It is a simple yet effective way to enhance your touchscreen experience and make the stylus more responsive.


Having a sensitive stylus can greatly enhance your mobile device experience, especially when it comes to tasks that require precision and accuracy. While most styluses are designed to be sensitive, there are several ways you can further optimize their performance.

First and foremost, choosing a stylus with a fine-tipped nib can make a significant difference in sensitivity. This ensures that the stylus can accurately detect even the slightest movements on your device’s screen. Additionally, keeping the stylus tip clean and free from debris or scratches is crucial for optimal sensitivity.

Moreover, utilizing a screen protector designed specifically for stylus usage can enhance sensitivity by reducing friction and providing a smoother gliding experience. Lastly, regularly calibrating your stylus or adjusting the touch sensitivity settings on your mobile device can improve overall responsiveness.

By following these tips, you can make your stylus more sensitive and enjoy a seamless and precise mobile experience.


1. How can I make my stylus more sensitive?
To make your stylus more sensitive, you can follow these steps:
1. Check the settings: Make sure that your device’s pressure sensitivity settings are maximized.
2. Clean the stylus tip: Sometimes, dirt and debris can accumulate on the stylus tip, affecting its sensitivity. Clean it gently using a soft cloth or tissue.
3. Replace the battery: If your stylus has a battery, make sure it is not running low as this can affect sensitivity.
4. Update software: Ensure that your device’s operating system and stylus-related applications are up to date. Software updates often include optimizations for stylus sensitivity.
5. Try a different stylus: If your current stylus is not meeting your sensitivity needs, consider trying a different one that is specifically designed for high sensitivity.

2. Can I increase the sensitivity of my finger on a touchscreen?
Unfortunately, you cannot directly increase the sensitivity of your finger on a touchscreen. Touchscreen sensitivity is primarily determined by the device’s hardware and software settings. However, there are a few things you can try to improve your touchscreen experience:
1. Ensure cleanliness: Make sure your touchscreen is clean and free from smudges or dirt, as these can interfere with touch sensitivity.
2. Use a stylus: Using a stylus can provide more precise control and may feel more sensitive compared to using your finger.
3. Adjust touch sensitivity settings: Some devices have touch sensitivity settings that allow you to customize how the touchscreen responds to your touch. Check your device’s settings to see if this option is available.
4. Consider a screen protector: Some screen protectors may affect touch sensitivity. You can experiment with different types of screen protectors to find one that offers optimal sensitivity for your needs.

3. Why does my stylus feel less sensitive over time?
Several factors can contribute to a stylus feeling less sensitive over time:
1. Worn-down tip: The tip of the stylus can wear down with regular use, resulting in decreased sensitivity. In such cases, replacing the stylus tip can help restore sensitivity.
2. Dirt and debris: Dirt, dust, and debris can accumulate on the stylus tip or device’s touchscreen, leading to reduced sensitivity. Regularly cleaning both the stylus and the touchscreen can help maintain optimal sensitivity.
3. Battery issues: If your stylus requires a battery, a low battery can impact its sensitivity. Ensure that the battery is sufficiently charged or replace it if necessary.
4. Software updates: Sometimes, software updates can introduce changes that affect stylus sensitivity. Checking for and installing any available software updates can help resolve such issues.

4. Are there any special stylus options for artists and designers who need high sensitivity?
Yes, there are specific stylus options available for artists and designers who require high sensitivity for precise and detailed work. These stylus options are often designed with features like pressure sensitivity, tilt support, and customizable buttons to enhance the overall creative experience.
Artists and designers may also opt for stylus models specifically designed for use with certain art and design applications. These styluses offer better compatibility and provide a more seamless workflow for digital art creation.

5. Can using a screen protector affect stylus sensitivity?
Yes, using a screen protector can potentially affect stylus sensitivity. Some screen protectors, especially those made of thicker materials or with rough surfaces, can interfere with the smooth glide and accuracy of a stylus. This interference may result in reduced sensitivity or imprecise input.
To address this issue, consider using screen protectors that are specifically designed for stylus compatibility or those with a smoother surface that offers minimal impact on sensitivity. Additionally, try different types of screen protectors to find one that maintains optimal stylus sensitivity while providing the desired level of screen protection.