Are you looking to revert your Xiaomi Redmi Note 4X to its original settings? Whether you’re experiencing technical issues or simply want a fresh start, reverting your Redmi Note 4X can be a straightforward process with the right instructions. In this article, we will guide you through the necessary steps to revert your Xiaomi Redmi Note 4X device, ensuring that you can enjoy a hassle-free experience with your smartphone. From backing up your data to performing a factory reset, we will provide you with all the information you need to successfully revert your Xiaomi Redmi Note 4X. So, let’s dive in and learn how to bring your device back to its original state.
Inside This Article
- Point 1: Preparing for the Reversion
- Point 2: Unlocking the Bootloader
- Point 3: Flashing the Stock ROM
- Point 4: Verifying the Reversion
- Conclusion
- FAQs
Point 1: Preparing for the Reversion
Before you begin the process of reverting your Xiaomi Redmi Note 4X, it’s important to make sure you have everything you need and have taken the necessary precautions. Here is a step-by-step guide to help you get ready for the reversion:
1. Backup your data: Reverting your phone will delete all your data, so it’s crucial to create a backup of your important files and documents. You can use the built-in backup feature in MIUI or use third-party applications to ensure all your data is safe.
2. Check your battery level: It’s recommended to have your phone’s battery level at least 50% before starting the reversion process. This ensures that your phone doesn’t run out of battery during the process, which could potentially cause issues.
3. Enable USB debugging: To proceed with the reversion, you’ll need to enable USB debugging on your Xiaomi Redmi Note 4X. To do this, go to Settings > About phone > MIUI version and tap on it seven times to enable Developer options. Then, go to Settings > Additional settings > Developer options and enable USB debugging.
4. Install necessary drivers: Make sure you have the necessary USB drivers installed on your computer. This will ensure a proper connection between your phone and your computer during the reversion process. You can download the drivers from the official Xiaomi website or use a driver installation tool.
5. Gather the required tools: To successfully revert your Xiaomi Redmi Note 4X, you’ll need a computer with the appropriate software and firmware files. Make sure you have a reliable internet connection to download the necessary files.
By following these steps and preparing for the reversion process, you’ll ensure a smooth and successful transition back to the previous version of your Xiaomi Redmi Note 4X.
Point 2: Unlocking the Bootloader
Unlocking the bootloader of your Xiaomi Redmi Note 4X is an essential step to gain full control over your device and enable various customization options. By unlocking the bootloader, you can install custom ROMs, root your phone, and even flash different kernels.
However, it’s important to note that unlocking the bootloader voids your device’s warranty. So proceed with caution and make sure you understand the risks involved.
Here’s a step-by-step guide to unlocking the bootloader of your Xiaomi Redmi Note 4X:
- Step 1: Enable Developer Options
Go to Settings on your phone and scroll down to find “About Phone.” Tap on it and locate “MIUI version.” Tap on it repeatedly until you see the message “You are now a developer!” - Step 2: Enable USB Debugging
In the developer options, enable USB Debugging. This will allow your computer to communicate with your phone when necessary. - Step 3: Create a Mi Account
Visit the official Xiaomi website and create a Mi Account. This account will be required to unlock the bootloader. - Step 4: Obtain the Unlocking Tool
Download the Mi Unlock Tool from the Xiaomi website. This tool is necessary to unlock the bootloader of your Xiaomi Redmi Note 4X. - Step 5: Request for Bootloader Unlocking Permission
Open the Mi Unlock Tool on your computer and sign in with the Mi Account you created. Follow the instructions provided to request bootloader unlocking permission from Xiaomi. - Step 6: Wait for Approval
Once you have submitted the request, you will have to wait for Xiaomi to approve it. This may take a few days or even a week. Keep checking your Mi Unlock Tool for updates. - Step 7: Unlock the Bootloader
After your request is approved, follow the instructions provided by the Mi Unlock Tool to unlock the bootloader of your Xiaomi Redmi Note 4X. This process will erase all data on your phone, so make sure to backup your important files beforehand. - Step 8: Reboot Your Device
Once the bootloader is unlocked, your device will automatically reboot. Congratulations! You have successfully unlocked the bootloader of your Xiaomi Redmi Note 4X.
Now that your bootloader is unlocked, you have the freedom to explore various customization options for your Xiaomi Redmi Note 4X. Whether you want to install custom ROMs for a different user experience or root your device for advanced functionality, the unlocked bootloader opens up a whole new world of possibilities.
Remember, unlocking the bootloader is an advanced procedure and should be done with caution. Make sure to follow the instructions carefully and backup your data before proceeding. Enjoy the freedom and flexibility that comes with an unlocked bootloader on your Xiaomi Redmi Note 4X!
Point 3: Flashing the Stock ROM
Flashing the stock ROM on your Xiaomi Redmi Note 4X can be a lifesaver if you’re facing software issues or want to revert to the original operating system. This process involves replacing the current custom ROM with the official firmware provided by Xiaomi. Here’s a step-by-step guide to help you flash the stock ROM:
1. Backup your data: Before proceeding with flashing the stock ROM, it is crucial to backup all your important data, as the process will erase everything on your device. You can use cloud storage or an external storage device to keep your data safe.
2. Download the stock ROM: Visit the official Xiaomi website or reliable third-party sources to download the stock ROM for your Redmi Note 4X. Make sure to download the correct ROM version to avoid any complications.
3. Enable USB debugging: To enable USB debugging, go to Settings on your device and tap “About Phone.” Scroll down and tap on “MIUI Version” multiple times until you see the message “You are now a developer.” Go back to the main Settings menu and select “Additional Settings” > “Developer Options” > “USB Debugging” and enable it.
4. Install Mi Flash Tool: Mi Flash Tool is a software developed by Xiaomi that allows users to flash the stock ROM on their devices. Download and install Mi Flash Tool on your computer.
5. Boot your device into Fastboot mode: Power off your Redmi Note 4X and then press and hold the Volume Down and Power buttons together until you see the Fastboot logo on the screen. Connect your device to the computer using a USB cable.
6. Open Mi Flash Tool: Launch Mi Flash Tool on your computer. It will detect your connected Redmi Note 4X in Fastboot mode.
7. Locate the firmware: In Mi Flash Tool, click on the “Browse” button and navigate to the location where you saved the downloaded stock ROM file. Select it and click on “Ok” to proceed.
8. Flash the ROM: Once you have selected the firmware in Mi Flash Tool, click on the “Flash” button to start the flashing process. It may take a few minutes, so be patient and avoid disconnecting your device during this time.
9. Wait for the process to complete: Once the flashing process is complete, you will see a “Success” message in Mi Flash Tool. You can then disconnect your Redmi Note 4X from the computer and reboot it.
10. Set up your device: After rebooting, your Redmi Note 4X will be running the stock ROM. Follow the on-screen instructions to set up your device and restore your data from the backup you created earlier.
Flashing the stock ROM is a relatively advanced procedure and should be carried out with caution. If you are not confident in your technical skills, it is recommended to seek assistance from a professional or do thorough research before proceeding. Keep in mind that flashing the stock ROM will also void the warranty on your device.
Point 4: Verifying the Reversion
After successfully flashing the stock ROM on your Xiaomi Redmi Note 4X, you will now need to verify if the reversion process was completed without any issues. This step is crucial to ensure that your device is fully reverted to its original state.
The first thing you should do is power on your device. If it boots up successfully and you are able to access the home screen, it is a good indication that the reversion process was successful.
Next, check the software version and build number of your device. Go to the device settings and navigate to the “About phone” section. Look for the software version and build number, which should match the official stock ROM that you flashed.
Additionally, check if all the pre-installed apps and features that were present on your device before the reversion are now restored. This includes the default system apps, wallpapers, ringtones, and any other customized settings that were previously set on your device.
Test the functionality of your device by making calls, sending messages, connecting to Wi-Fi, and using other features like the camera and Bluetooth. Ensure that everything is working smoothly without any glitches or issues.
If you encounter any problems or notice any discrepancies during the verification process, it might indicate that the reversion process was not completely successful. In such cases, you can repeat the steps mentioned earlier to flash the stock ROM again or seek assistance from the Xiaomi support team or online forums dedicated to Xiaomi devices.
Once you have verified that your Xiaomi Redmi Note 4X has been successfully reverted to its original state, you can rest assured that your device is back to its intended functionality and can be used as before.
Conclusion
Reverting your Xiaomi Redmi Note 4X to its previous state is a simple process that can solve a range of issues you may be experiencing with your device. Whether you’re facing software glitches, performance issues, or you simply want to undo a recent update, following the steps outlined in this guide will help you revert your device to its original settings.
By performing a factory reset or flashing the stock firmware, you can ensure that your Redmi Note 4X returns to its default state, eliminating any software conflicts or modifications that may have caused problems. Remember to always create a backup of your important data before reverting your device, as the process will erase all data on your phone.
With the comprehensive instructions and insights provided in this article, you now have the knowledge and tools to successfully revert your Xiaomi Redmi Note 4X, restoring it to its former functionality and performance. Enjoy a smoother and more reliable experience with your device!
FAQs
1. How do I revert my Xiaomi Redmi Note 4X to its original settings?
To revert your Xiaomi Redmi Note 4X to its original settings, you can follow these steps:
- Go to the “Settings” menu on your phone.
- Scroll down and tap on “Additional Settings”.
- Tap on “Backup & reset”.
- Choose “Factory data reset”.
- Read the warning and confirm your action by tapping on “Reset phone”.
- Your phone will now start the reset process and will reboot once it’s done.
Please note that resetting your phone will erase all the data and settings, so make sure to back up any important information.
2. How can I restore my Xiaomi Redmi Note 4X from a backup?
To restore your Xiaomi Redmi Note 4X from a backup, you can follow these steps:
- Go to the “Settings” menu on your phone.
- Scroll down and tap on “Additional Settings”.
- Tap on “Backup & reset”.
- Tap on “Local backups”.
- Choose the backup file you want to restore from.
- Tap on “Restore” and follow the prompts to complete the restoration process.
Please note that you should have previously created a backup using the built-in backup feature.
3. How do I update the software on my Xiaomi Redmi Note 4X?
To update the software on your Xiaomi Redmi Note 4X, you can follow these steps:
- Go to the “Settings” menu on your phone.
- Scroll down and tap on “About phone”.
- Tap on “System updates”.
- Your phone will now check for available updates.
- If an update is available, tap on “Download” and wait for the download to complete.
- Once the download is complete, tap on “Install” to install the update.
Please note that it is recommended to connect to a Wi-Fi network and ensure that your phone has sufficient battery power before starting the update process.
4. How do I transfer data from my old phone to my Xiaomi Redmi Note 4X?
To transfer data from your old phone to your Xiaomi Redmi Note 4X, you can use the built-in Mi Mover app. Here’s how:
- Install the Mi Mover app on both your old phone and the Redmi Note 4X.
- Open the Mi Mover app on both phones.
- On your old phone, select “Send” and on the Redmi Note 4X, select “Receive”.
- Follow the on-screen instructions to connect the two phones using Wi-Fi or QR code.
- Select the data you want to transfer and start the transfer process.
- Once the transfer is complete, you will find your data on the Redmi Note 4X.
Please note that not all data can be transferred, so it’s best to check the compatibility of the data you want to transfer with the Mi Mover app.
5. How do I take a screenshot on my Xiaomi Redmi Note 4X?
To take a screenshot on your Xiaomi Redmi Note 4X, you can use the following methods:
- Press and hold the power button and volume down button simultaneously until you see a screenshot animation.
- If you have enabled it, you can swipe down from the top of the screen to access the notification shade, then swipe down again and tap on the screenshot icon.
The screenshot will be saved in the “Screenshots” folder in your phone’s gallery.
