15 Best iPad Stands That Are Compatible With All iPad Models

First up, we have the Viozon iPad Stand. It’s everything you’re looking for in an iPad stand: durable, portable, ergonomic, and affordable. The base is made out of 1.6 pounds of solid aluminum alloy, which ensures that the stand (and your iPad) won’t topple over. It also has silicone grips that keep your iPad secure without scratching it.

The Viozon iPad Stand comes with two adjustable plastic holders: one for tablets ten inches and under, and one for those 13 inches and under. You can rotate these holders to 360 degrees so you can use your tablet in either landscape or portrait mode. The adjustable holder also lets you tilt your iPad anywhere from -45 degrees to 180 degrees.

Whether you’re working at home or in the office, the Lamicall iPad Stand will work great for you. With a strengthened alloy steel build, durability is a guarantee with this one. It’s still lightweight, so it’s easy to put away and bring back out whenever you need to. The stand also supports both landscape and portrait modes; if your iPad is more than 12 inches tall, you might be better off sticking to landscape mode, as this will give you more stability.

The Lamicall iPad Stand’s arm is also easily adjustable. You can tilt it up to 270 degrees so that your viewing angle is almost flat. It also has rubber pads and feet to protect your iPad from scratches and to prevent sliding. On top of that, it’s compatible with almost any smartphone and tablet, not just with iPad models.

The Twelve South Compass Pro is your best bet when it comes to portability. It’s very compact — you can fold it flat and place it inside its sleeve so you can bring it with you anywhere.

Besides being portable, it’s also highly adjustable. You can push the back leg if you want to go for a more acute angle. This iPad stand also comes with a much shorter secondary back leg, which you can pull out if you want your tablet to be at a much lower angle; this is perfect for when you want to use your tablet for typing or sketching. You can also adjust the width of the two front legs so that it can support tablets of any size, from an iPad mini to a 12.9-inch iPad Pro.

In addition, most of the iPad stand is made out of metal, but the lower parts of its legs are made of silicone. This protects your device from scratches and prevents it from slipping.

If you’re looking for a no-frills iPad stand that gets the job done, then the Stump Stand is the one for you. It’s small and made out of hard silicone rubber, so it’s portable and doesn’t take up a lot of desk space. That said, its material also makes it durable and stable.

The Stump Stand offers three viewing modes: Ramp, Upright, and Lean. It works with any mobile device, including smartphones, tablets, and e-readers. However, it doesn’t offer enough stability for a 12.9-inch iPad Pro in portrait mode, so it’s better to go landscape when using larger tablets. It also comes in five different colors: black, white, red, royal blue, and sea glass.

At just $4.99, the MoKo Tablet Stand is the best option for those on a tight budget. Despite being cheap, it’s very sturdy and works well as an iPad stand. You can adjust your tablet’s viewing angle by placing the backplate on one of the six slots, which are each labeled with their respective angle degrees. Aside from that, it has strategically placed rubber pads that protect your iPad from scratches and sliding.

The best thing about the MoKo Tablet Stand is that it’s extremely light and portable. You can fold it completely flat then throw it in your bag or even place it inside your pocket.

The KABCON iPad Stand is great for all-around use. It’s perfect for sketching on your iPad, typing, following a recipe while you’re cooking, and many more. With its wide metal plate, it can perfectly support iPads of all sizes, from the iPad mini to the iPad Pro. It’s also compatible with other tablets that are up to 15 inches wide, phones, e-readers, and even laptops.

The KABCON iPad stand is made mostly out of aluminum alloy, so it’s rock solid and won’t budge. With the adjustable metal plate and legs, you can change your iPad’s viewing angle and the stand’s height to your liking. You can also take the stand with you anywhere, as it folds flat and comes with a travel bag.

The AICase iPad Stand is a great combination of durability and portability. It’s mostly made out of spaceflight AI-Ti alloy and super-high strengthened alloy steel, which makes it sturdy but still lightweight. It works great with any tablet, from the smaller ones like the iPad Mini to the bigger ones like the iPad Pro and the Surface Pro. This stand can also easily support both landscape and portrait modes. However, you have to be careful when using it with larger tablets in portrait mode because it tends to be less stable. It’s better to set your larger tablets horizontally when using this stand.

The AICase stand also has rubber pads on the holder to protect your tablet from scratches and a rubber sole to prevent sliding. It’s perfect for watching videos, viewing photos, playing games, following a recipe while cooking, and many more.

If you’re looking for an iPad stand that you can mount on any surface, the CTA Kitchen Mount Stand is perfect for you. It comes with two mounting cradles that you can easily install on walls. This is especially useful when you want to use your iPad around the kitchen. But if you just want to set the stand on a tabletop, you can do so as well; the stand features expanding legs that allow for stable placement on any desk or countertop.

On top of that, the CTA Kitchen Mount Stand comes equipped with flexible joints and a 360-degree rotating holder. They allow you to easily adjust the viewing angle and set your iPad to either landscape or portrait mode. The stand also has soft silicone slide-adjust holders that secure your tablet without scratching it. Plus, you can use the quick-release button on the side so you can easily insert and remove your tablet.

The Tryone Gooseneck stand is as flexible as iPad stands can get. Its arm is made out of stiffened aluminum-magnesium alloy, so it’s flexible but also very sturdy. The base is a reinforced bolt clamp, which you can fasten to the edge of any piece of furniture as long as it’s at most three inches thick.

This stand is great for watching videos, viewing photos, and reading. However, it won’t offer the support you need for sketching and typing—basically, any activity that requires touching and tapping on your iPad a lot.

If you want to use your iPad while standing, then the Anyike Gooseneck Floor Stand will work great for you. It’s got a simple design and is very easy to assemble. The floor rods are also hollow, which allows you to insert weights for added stability. Plus, the stand only weighs about three pounds, so you can easily move it around the house or even take it with you outdoors.

The Anyike Gooseneck Floor Stand also sports a swivel gooseneck, which you can adjust to get the best viewing angle. It also has cushioned grips that can support tablets of all sizes. Remember to take your tablet’s case off before attaching it to the stand so that it can hold your device more securely.

The Rain Design iRest Lap Stand is great for when you want to use your iPad while lounging. Its most unique features are its foam-cushioned legs and torque hinge; these let you achieve the best viewing angle so you can read or watch videos without straining your hands and neck.

The iRest Lap Stand isn’t just ideal for lounging—it’s good for working as well. Simply remove the soft foam cushions, and you’ve got a stable iPad stand that you can place on a desk or a kitchen countertop. Plus, it’s compatible with any tablet and e-reader, as long as they’re no thicker than half an inch.

The MOFT X Tablet Stand is a good mixture of versatility, functionality, and minimalism. With its ultra-slim design, it’s no question that you can take it with you anywhere. But despite being lightweight, it’s durable and gives stable support for a wide range of iPad models. So, whether you use your iPad for sketching, typing, watching videos, or reading, you can rely on the MOFT X Tablet Stand. Besides that, this stand also offers three viewing angles that work for both landscape and portrait modes.

You can also use the stand as a handgrip for when you’re carrying your tablet around. Plus, it comes with a pencil holder, which can be clipped to the back of the iPad stand.

Here’s another iPad stand that you can use while lounging on the couch or in bed. The Ipevo PadPillow Stand is as warm and comfy as a pillow, but also sturdy enough to keep your tablet upright. Its fabric cover is removable and hand-washable, so you don’t have to worry about the PadPillow Stand accumulating dust and dirt.

This iPad stand is versatile as well. You can fold it out to adjust the viewing angle or to make room for a wireless keyboard while also providing ample support for your wrists. It also comes with a storage compartment at the back where you can keep your Apple pencil, cables, or a small notebook.

Another similar option to the PadPillow Stand is the Flippy Pillow Lap Stand. But what makes this different is that instead of unfolding it to change the viewing angle, you rotate the Flippy Pillow Lap Stand to get the best angle—hence the name. It offers three viewing angles that are expertly designed for every lighting and reading position, whether you’re sitting up or lying down.

The Flippy Pillow Lap Stand is made with foam that’s lightweight but sturdy and a plush polyester cover that’s easy to keep clean. This iPad Stand is compatible with a wide range of tablets and iPad models, e-readers, and smartphones. It can even substitute as a book holder. You can get it in 18 colors and patterns, so you can easily match it to your aesthetic.

And lastly, here’s an iPad stand that’s perfect for keeping backseat passengers entertained during road trips. The Macally Mount Holder has clamps that you can easily fasten to the arms underneath your car’s headrest. With its extendable arm, you can easily keep the tablet in view, whether you have one or multiple backseat passengers. The stand’s cradle is adjustable and accommodates most tablets, smartphones, and handheld consoles—even with their cases on. Plus, the ball-head allows you to adjust the viewing angle and rotate the mount up to 360 degrees.