To fix a Spinpop Popsocket, you typically need to clean and reattach the adhesive base to resolve a loose grip, or clean debris from the rotating mechanism to fix a non-spinning one. While there is no official Spinpop repair guide, these general steps for collapsible grips will help restore function, and the Spinpop is confirmed to be compatible with some PopSockets-compatible magnetic mounts.
What to do when your Spinpop Popsocket needs a fix
Because the manufacturer does not provide a specific Spinpop repair guide, the steps below are general best practices for collapsible phone grips. The Spinpop is described as a collapsible grip that works with some PopSockets-compatible magnetic mounts, so these methods are appropriate for restoring its stick and spin.
How to reattach a loose Spinpop Popsocket
If your Spinpop has come loose, reattaching it requires a clean surface and fresh adhesion. Follow these steps:
- Remove the grip by gently prying it away from your phone or case.
- Clean the phone surface where the grip attaches using an alcohol wipe or a cloth with rubbing alcohol. Remove all dirt, oils, and residue.
- Clean the adhesive disc on the back of the Spinpop with the same alcohol wipe to remove debris.
- Apply a small amount of adhesive to the back of the Popsocket before reattaching.
- Align the grip with your desired position and press it firmly onto the surface for 15 seconds.
- Allow the adhesive to set for one hour before using the grip.
Fixing a Spinpop Popsocket that won't rotate
A non-rotating Spinpop is usually caused by debris in the mechanism or an obstruction. Try these steps:
- Clean the rotating mechanism gently using a soft brush or a toothpick to remove any dirt or lint.
- Apply WD-40 to lubricate the rotating mechanism.
- Check your phone case for raised edges or thick material that might block the grip from turning.
- If the mechanism feels misaligned, lift the grip slightly and reposition it on the phone to realign the internal parts.
Replacing a broken Spinpop Popsocket
If your Spinpop is cracked or the mechanism is damaged beyond repair, replacement is the best option.
- Remove the broken grip by pulling it straight up from the phone.
- Inspect your phone case for any damage caused by the broken grip.
- Purchase a new Spinpop grip.
- Attach the new grip using the reattachment steps above: clean the phone surface, press firmly for 15 seconds, and let it set for one hour.
Tips to keep your Spinpop grip working
To extend the life of your Spinpop, clean the adhesive disc regularly with a damp cloth or alcohol wipe to remove dust and oils. Avoid twisting or pulling the grip with excessive force, as this can damage the rotating mechanism. Understand that each time you remove and reapply the grip, the adhesive loses some strength, so repeated reapplication will reduce its sticking ability over time.
For more complex issues, remember that general Popsocket installation and repair techniques apply, but the manufacturer does not offer official troubleshooting steps for Spinpop-specific problems.
Frequently Asked Questions
Can I reuse a Spinpop Popsocket after removing it?
Yes, Spinpop grips are designed to be reusable. If the adhesive loses stickiness, clean the back of the grip with mild soap and water, let it air dry, and reapply to a clean surface. Repeated reattachment will reduce adhesive effectiveness over time.
How do I remove a Spinpop Popsocket without leaving residue?
Gently pull the grip straight up from the base of the expanding disc. If any adhesive residue remains, wipe it away with a mild cleaning solution and a soft cloth. Avoid harsh chemicals or abrasive tools that could damage your phone or case.
Are Spinpop Popsockets compatible with all phone cases?
Spinpop grips adhere best to smooth, hard surfaces. They may not stick well to silicone or rubberized cases. If you have a silicone case, attach the grip directly to your phone instead.
Can a Spinpop Popsocket interfere with wireless charging?
In some cases, the metal components of a Spinpop may interfere with wireless charging. If you experience charging issues, reposition the grip so it is not covering the charging coil, or choose a non-metallic grip designed for wireless charging compatibility.
Can I customize my Spinpop Popsocket?
Yes, you can customize your Spinpop Popsocket by swapping the top disc with compatible PopSockets accessories or decorating it with skins and decals designed for standard PopGrips.
For the wider topic, see Popsocket installation and repair.
