To open a spinpop grip, hold the base firmly with one hand and pull the top section upward until the accordion-like mechanism extends fully. While "Spinpop Popsocket" is not an official product from either brand, these general steps apply to similar pop-out grips that expand for a secure hold and collapse flat when not in use.
How to open a spinpop grip: a quick guide
The basic mechanism is a simple pull-to-expand design. Grasp the flat base attached to your phone or case, then use your other hand to pull the top of the grip straight up. The accordion section will extend, creating a loop you can slip your fingers through. To close it, push the top back down until it sits flush against the base. Note that SpinPop and PopSockets are separate brands, and no official product combines both names. These instructions work for any similar pop-out grip that uses an expanding accordion mechanism.
Before you start: what you need to know
No official documentation exists for a product called "Spinpop Popsocket." PopSockets MagSafe grips are documented to pop out for holding and fold back when not in use, while SpinPop is a separate brand of expandable grips. If you have a PopSockets grip, it may be compatible with MagSafe cases; non-MagSafe cases require an adapter ring. Check the packaging for instructions or additional information specific to your model before opening.
Step-by-step: expanding your spinpop grip
- Hold the base of the grip against your phone or case with one hand.
- With your other hand, grip the top portion of the grip and pull upward gently but firmly.
- The accordion section will extend, creating a finger loop. Pull until the grip is fully open.
- If the grip feels stiff, apply steady, even pressure rather than jerking. The mechanism should extend smoothly once the initial resistance is overcome.
Troubleshooting a stuck or stiff grip
If your grip will not expand or collapse smoothly, debris in the accordion grooves is the most common cause. Clean the grooves carefully using a soft brush or toothpick to remove dust, lint, or dirt. This should restore smooth movement. If the grip remains stuck, check that the base is properly attached and not misaligned. If the grip does not rotate smoothly, clean the rotating parts and apply a small amount of lubricant like silicone spray. If the grip feels loose or wobbly, try twisting it clockwise to tighten; if that fails, remove and reattach it for a snug fit. For PopSockets grips that use MagSafe, ensure your case is MagSafe-compatible or that an adapter ring is installed.
Frequently Asked Questions
Can I reuse a spinpop grip after opening it?
Yes, these grips are designed to be reusable. You can expand and collapse them repeatedly without losing functionality.
Is it easy to open a spinpop grip?
Yes, the pull-to-expand mechanism is straightforward. Most users can open the grip with one hand once they understand the basic motion.
Can I adjust the size of the grip once it is open?
The grip expands to a fixed maximum size determined by its accordion design. You can partially collapse it to reduce the loop size, but it does not offer variable locking positions.
What should I do if my grip still won't open after cleaning?
If cleaning the grooves does not help, the mechanism may be damaged. For Popsocket installation and repair, contact the manufacturer directly. For SpinPop grips, reach out to that brand's customer support.
How do you put a popsocket back on if it comes off?
If the adhesive fails, clean both the grip base and your phone or case surface with rubbing alcohol, let it dry completely, then apply a new adhesive disc.
