To connect Avantree Bluetooth headphones to your phone, put the headphones into pairing mode, turn on Bluetooth on your phone, and then select the Avantree model name when it appears in the phone's Bluetooth list. This process allows you to listen to music or take calls wirelessly, making connecting Bluetooth to phones a straightforward task.
Put your Avantree headphones in pairing mode
From the off state, hold the power or MFB button for about 5 seconds until the LED flashes red and blue alternately. On some models, such as the Audition or Audition Pro, the first time the headphones are turned on they may enter pairing mode automatically. If your headphones have a TV/OFF/PHONE switch, ensure it is set to PHONE before attempting to pair. Some models have separate operating modes or switches, such as TV/OFF/PHONE, and must be set to PHONE before Bluetooth pairing. The exact control for entering pairing mode depends on the model, so check your specific headset's instructions if the standard method does not work.
Enable Bluetooth on your phone
On an iPhone, go to Settings > Bluetooth and toggle Bluetooth to On. On an Android phone, swipe down from the top of the screen, touch and hold Bluetooth, then tap Pair new device; if that option is not shown, check Available devices or tap More > Refresh. Note that the exact menus may vary slightly by device version and manufacturer skin.
Select your Avantree headphones from the list
On your phone, tap the Avantree model name when it appears in the Bluetooth device list. Common model names include Avantree Audition Pro, Avantree AS9S, Avantree AS9 B, Avantree TWS105, and Avantree TWS106. Some models require entering passkey 0000 or accepting the connection request. After pairing, the headphones give a voice prompt such as 'your headset is connected' or 'connected' on supported models.
Troubleshooting common connection issues
If the headphones do not appear in the phone's Bluetooth list, remember that powering on does not mean pairing mode; the LED must flash red and blue for the device to be discoverable. Avantree recommends rebooting both the headphones and the phone and trying again. For the Audition series, Avantree documents a factory reset by pressing + and - together for 7-8 seconds until the LED turns pink; after resetting, the device should re-enter pairing mode. Some models have a TV/OFF/PHONE switch that must be set to PHONE before Bluetooth pairing will work. For NFC pairing, one Avantree manual says the phone must have NFC, the screen must be active and unlocked, and the phone must support NFC pairing prompts.
Frequently Asked Questions
Are Avantree Bluetooth headphones compatible with any phone?
Yes, Avantree Bluetooth headphones are designed to connect to any phone that supports Bluetooth connectivity, including iPhones, Android devices, and other mobile phones with Bluetooth capabilities.
Can I connect my Avantree headphones to multiple devices at once?
Most Avantree models can only connect to one device at a time. However, some models support a multipoint feature that allows connection to two mobile devices such as cellphones and tablets simultaneously, but not PCs or Bluetooth transmitters. Check your headphone's user manual for specific features.
How do I disconnect my Avantree headphones from my phone?
To disconnect, go to your phone's Bluetooth settings, find the list of connected devices, select your Avantree headphones, and choose the option to disconnect or unpair. Alternatively, simply turning off the headphones will automatically disconnect them from your phone.
