To turn on Beats wireless earbuds, the action you need to take depends entirely on your specific model. For Beats Studio Buds, Studio Buds +, Fit Pro, and Powerbeats Pro, simply remove them from their charging case and they power on automatically; for the Beats Flex, you must press and hold the power button on the right control module for exactly 1 second.
How to turn on Beats wireless earbuds: the quick model guide
Most modern Beats earbuds power on automatically when you take them out of the case, so there is no manual button to press for these models. If your earbuds are not turning on, check which model you own and follow the specific instruction below.
- Automatic power-on (no button needed): Beats Studio Buds, Beats Studio Buds +, Beats Fit Pro, and Powerbeats Pro all turn on the moment you remove them from their charging case. They also power off automatically when you place them back inside the case and close the lid.
Turning on Beats Flex earbuds manually
If you own Beats Flex, follow these verified steps to power them on:
- Locate the right control module on the cable. This is the larger module with buttons on it.
- Press and hold the power button for exactly 1 second. Do not hold it longer. The power button symbol looks like a circle with a vertical line in the middle.
- Release the button. The LED indicator light on the module will turn on, confirming the earbuds are powered on and ready to pair or connect.
Holding the power button for longer than 1 second, typically 5 seconds or more, may put the earbuds into pairing mode instead of simply turning them on. If you accidentally enter pairing mode, turn the earbuds off and try again with a shorter press.
Why won't my Beats earbuds turn on?
If your Beats earbuds are not powering on, the most common cause is a drained battery. Place the earbuds in their charging case and ensure the case itself has charge. For Beats Flex, connect them to a power source using the charging cable and wait a few minutes before trying to turn them on again.
Another frequent issue is confusing power-on with pairing mode. If you hold the button too long (especially on Beats Flex), the earbuds enter pairing mode rather than just turning on. Release the button after 1 second to power on normally.
If the earbuds still do not respond, perform a simple reset: place the earbuds back in the charging case, close the lid, wait 10 seconds, then remove them again. For Beats Flex, turning them off and then pressing the power button again for 1 second often resolves the issue.
If earbuds are not charging, check that the charging contacts on the earbuds are clean and free of debris.
If experiencing poor audio quality, check for debris or earwax on the earbuds' speaker grills and clean them gently with a soft, dry cloth.
If earbuds have suffered physical damage, such as a broken or bent part, contact Beats customer support or an authorized repair center rather than attempting self-repair, which may void the warranty.
Connecting your Beats wireless earbuds to a device
Once your Beats earbuds are powered on, follow these steps to connect them to your phone, tablet, or computer:
- On your device, open the Bluetooth settings menu and ensure Bluetooth is turned on.
- If your earbuds are in pairing mode (typically indicated by a flashing LED), they will appear in the list of available devices. If they are not in pairing mode, press and hold the power button (or the system button on automatic models) until the LED flashes.
- Select your Beats earbuds from the list. The name will usually appear as "Beats" followed by a model identifier.
- Confirm any pairing request or passcode prompt on your device. The earbuds are now connected.
To connect Beats wireless earbuds to a new device, you must first put them in pairing mode by holding the button until the LED flashes, then repeat the steps above.
Frequently Asked Questions
Can I use Beats wireless earbuds with any device?
Yes, Beats wireless earbuds work with any Bluetooth-enabled device, including Android phones, iPhones, Windows computers, and tablets. The pairing process is the same across all platforms.
How do I control the volume on Beats wireless earbuds?
Volume is controlled from your connected device, not from the earbuds themselves. Use your phone, tablet, or computer volume buttons, or adjust volume within the app you are using.
How do I turn off Beats wireless earbuds?
For automatic models like Studio Buds and Fit Pro, simply place them back in the charging case and close the lid, they power off automatically. For Beats Flex, press and hold the power button for 1 second to turn them off.
