To turn on Beats wireless headphones, press and hold the power button on the right earcup or control module for about one second until the LED indicator or fuel gauge lights up. For true wireless earbuds like Beats Studio Buds, Powerbeats Pro, and Beats Fit Pro, simply remove them from their charging case and they power on automatically.
How to turn on Beats wireless headphones by model
Beats wireless headphones use two distinct power-on methods depending on the model: a physical button press for over-ear and neckband models, or automatic power-on from the charging case for true wireless earbuds. Below is a quick-reference guide for each current model.
Over-ear headphones (Solo3, Studio3, Studio Pro)
- Locate the power button on the right ear cup.
- Press and hold the power button for 1 second.
- Release the button when the fuel gauge or LED indicator lights up. This confirms the headphones are powered on.
For Beats Studio Pro specifically, hold down the System button on the right ear cup until the Fuel Gauge LEDs illuminate. For Beats Solo3 Wireless, the LED indicator or fuel gauge lights up when the button is held. Beats Solo3 Wireless features Apple's H1 chip for seamless connectivity with Apple devices. For Beats Studio3 Wireless, press and hold the power button for 1 second until the fuel gauge lights up. Beats Studio3 Wireless features Pure Adaptive Noise Cancelling (Pure ANC) technology.
Neckband earbuds (Beats Flex)
- Find the power button on the right control module.
- The LED indicator confirms the earbuds are on.
Beats Flex battery life is up to 12 hours. Beats Flex magnetic earbuds automatically pause playback when connected.
True wireless earbuds (Studio Buds, Powerbeats Pro, Fit Pro)
Beats Studio Buds, Studio Buds +, Powerbeats Pro, Powerbeats Pro 2, and Beats Fit Pro do not have a physical power button on the earbuds themselves. They automatically power on when you remove them from their charging case. To confirm they are on, check that the LED on the case or the earbuds indicates they are active. These models rely entirely on the charging case for power management. Powerbeats Pro battery life is up to 9 hours. Powerbeats Pro are sweat and water-resistant with adjustable ear hooks for secure fit during workouts.
What to do if your Beats headphones won't turn on
Ensure the headphones are charged
Before attempting to turn on any Beats model, confirm the battery has enough power. Connect the headphones or charging case to a power source using the included charging cable and allow them to charge for a period. For over-ear models, the fuel gauge or LED will indicate charging status. For true wireless earbuds, the case LED shows charging progress. For the Beats Pill speaker, press the power button on top for 3 seconds to turn on.
Perform a model-specific reset
If the headphones still will not power on, a reset may resolve the issue. For over-ear models, press and hold the power button and the volume down button simultaneously for about 10 seconds until the LED flashes. For true wireless earbuds, place them back in the charging case, close the lid, wait 10 seconds, then remove them again to trigger an automatic power-on. For Beats Flex, press and hold the power button and the volume down button for 10 seconds until the LED flashes. After a reset, you may need to pair the headphones again with your device.
Check for software updates
Outdated firmware can prevent headphones from powering on correctly. Check for available updates through the device they are paired with. For Apple devices, updates are delivered automatically through iOS/iPadOS when the headphones are connected. For Android, use the Beats app to check for updates. Follow the on-screen instructions to install any available firmware.
Test with a different device
If the headphones still will not turn on, try pairing them with a different smartphone, tablet, or computer. This helps identify whether the issue is with the original device’s Bluetooth settings or compatibility. If the headphones power on and connect successfully with another device, the problem lies with the original device, not the headphones.
Pairing your Beats after turning them on
After powering on your Beats, you need to pair them with your device. For iPhone or iPad, hold the headphones near your unlocked device and follow the on-screen pairing instructions. For Android or other Bluetooth devices, go to your device’s Bluetooth settings and select your Beats from the list of available devices. For complete step-by-step instructions, see the guide on how to connect Beats wireless earbuds.
Frequently Asked Questions
Why won't my Beats headphones turn on even after charging?
If the headphones are fully charged but still won't power on, try a reset as described in the troubleshooting section. If the reset does not work, check for software updates or test with a different device to rule out connection issues. Persistent problems may indicate a hardware fault requiring service.
How do I check battery on Beats headphones?
For over-ear models, press the power button briefly to view the fuel gauge LEDs. For true wireless earbuds, open the charging case lid near your paired iPhone or iPad to see the battery level on screen. On Android, use the Beats app. For detailed instructions, see the guide on how to check battery on Beats.
Can I use my Beats while they are charging?
Over-ear models like Solo3, Studio3, and Studio Pro can be used while plugged into a power source. True wireless earbuds cannot be used while charging because they charge inside the case. Beats Flex can be used while charging via the included cable.
How do I reset Jib true wireless earbuds if they won't turn on?
The reset process for Jib true wireless earbuds varies by model. If they still do not power on, consult the specific model’s manual. For complete instructions, see the guide on how to reset Jib true wireless earbuds.
Do Beats earbuds turn off automatically when put back in the case?
Yes. This conserves battery life without requiring a manual shutdown.
