Is your iPhone touch screen acting up and making it impossible to navigate your favorite apps or make calls? You’re not alone. Touch screen issues can be frustrating, but before you rush to a repair shop, there are a few troubleshooting tips you can try on your own. In this article, we’ll explore six simple and effective ways to fix a non-responsive iPhone touch screen. Whether the screen is completely unresponsive or only certain areas are affected, these tips will help you regain control of your device. From adjusting settings to performing a hard reset, we’ve got you covered. So, if you’re ready to get your iPhone back in tip-top shape, let’s dive into the solutions.
Inside This Article
- iPhone Touch Screen Not Working? Try These 6 Tips
- Restart your iPhone
- Clean the screen and your hands
- Remove any screen protector or case
- Update your iPhone software
- Conclusion
- FAQs
iPhone Touch Screen Not Working? Try These 6 Tips
Are you frustrated with your iPhone’s touch screen not working properly? Don’t worry, you’re not alone. Touch screen issues are a common problem that many iPhone users encounter. Fortunately, there are several tips you can try to troubleshoot and fix the issue. In this article, we will provide you with six tips to get your iPhone touch screen back to its responsive state. So, let’s dive in!
1. Restart your iPhone
One of the simplest and most effective troubleshooting steps for any iPhone issue is to restart your device. A restart can help resolve any temporary software glitches that might be causing the touch screen to malfunction. To restart your iPhone, hold down the power button until you see the “Slide to power off” option. Slide the power button to turn off your device, wait for a few seconds, and then press and hold the power button again until the Apple logo appears.
2. Clean the screen and your hands
A dirty or greasy screen can affect the responsiveness of your iPhone’s touch screen. Make sure to clean the screen using a soft, lint-free cloth. Additionally, ensure that your hands are clean and dry when using the touch screen. Oily or sweaty fingers can make it difficult for the screen to register touch inputs accurately.
3. Remove any screen protector or case
If you have a screen protector or a case on your iPhone, it’s worth removing them temporarily to see if they are causing the touch screen issue. Sometimes, poorly designed or worn-out screen protectors or cases can interfere with the touch sensitivity. Try using your iPhone without these accessories to determine if they are the culprits behind the unresponsive touch screen.
4. Update your iPhone software
Outdated software can lead to various glitches and problems, including touch screen issues. Make sure that your iPhone is running on the latest software version. To check for updates, go to Settings > General > Software Update. If an update is available, download and install it on your device. The software update might include bug fixes and improvements that can address the touch screen problem.
5. Perform a hard reset
If the touch screen is still not working after trying the above steps, you can perform a hard reset on your iPhone. This can help reset the hardware and software components, potentially resolving any deeper issues causing the touch screen problem. To perform a hard reset, press and hold the power button along with the Volume Down button (on iPhone X and later) or the Home button (on older iPhone models) until the Apple logo appears.
6. Contact Apple Support
If none of the above tips work, it’s recommended to contact Apple Support for further assistance. They have a team of experts who can help diagnose and resolve any hardware or software-related issues with your iPhone’s touch screen. Depending on your device’s warranty status, they might be able to offer repair or replacement options.
Remember, if your iPhone’s touch screen is still not working, it’s important to consult a professional rather than attempting any complex repairs yourself. Follow these tips, and hopefully, you’ll be able to resolve the touch screen issue on your iPhone and get back to enjoying the full potential of your device.
Restart your iPhone
One of the first and easiest steps you can take when your iPhone touch screen is not working is to simply restart your device. Restarting your iPhone can help resolve minor software glitches that may be interfering with the touch screen functionality.
To restart your iPhone, press and hold the power button until you see the slider appear on the screen. Slide the power icon from left to right to turn off your device. Once your iPhone is completely turned off, press and hold the power button again until the Apple logo appears, indicating that the device is restarting.
If a simple restart does not fix the touch screen issue, you can also try performing a force restart. To force restart an iPhone:
- For iPhone 8 or later: Press and quickly release the volume up button, then press and quickly release the volume down button. Finally, press and hold the side button until the Apple logo appears.
- For iPhone 7 and 7 Plus: Press and hold both the side button and volume down button until the Apple logo appears.
- For iPhone 6s and earlier: Press and hold both the home button and the sleep/wake button until the Apple logo appears.
A force restart can help resolve more stubborn software issues that may be causing the touch screen problem on your iPhone.
Clean the screen and your hands
One common reason why the touch screen on an iPhone may not be working properly is due to dirt, dust, or smudges on the screen. These can interfere with the responsiveness of the touch screen and make it difficult to accurately register touch inputs. To resolve this issue, it is important to clean both the screen and your hands.
Start by gently wiping the screen with a soft, lint-free cloth. Avoid using harsh cleaning chemicals or abrasive materials, as they may damage the screen. Use a gentle sweeping motion to remove any visible smudges or fingerprints.
In addition to cleaning the screen, it is also important to ensure that your hands are clean and free from any dirt or oils. Wash your hands thoroughly with soap and water before using your iPhone. This will help eliminate any potential contaminants that could interfere with the touch screen’s functionality.
If you find that the touch screen is still not working properly after cleaning the screen and your hands, move on to the next troubleshooting step.
Remove any screen protector or case
If your iPhone touch screen is not working, it could be due to an issue with the screen protector or case. Sometimes, these accessories can interfere with the touch sensitivity of your device. Follow these steps to remove them:
1. Gently remove any screen protector that is applied on your iPhone. Start by peeling it off from one corner and slowly work your way to the other side. Be careful not to apply too much pressure or pull it too forcefully, as this could damage the screen.
2. Similarly, if you have a case on your iPhone, take it off. Most cases can be easily removed by gently sliding or lifting them off the device. Set the case aside and make sure there are no dirt or debris inside that could potentially interfere with the touch screen.
3. Once you have removed the screen protector and case, wipe the screen and the back of your iPhone with a clean, microfiber cloth. This will help remove any fingerprints, smudges, or dirt that may have accumulated.
4. Now, try using the touch screen without the screen protector or case. Check if the touch sensitivity has improved. If the problem persists, proceed to the next troubleshooting step.
Remember, it’s important to keep your iPhone’s screen and case clean to ensure optimal touch screen performance. Regularly clean the screen with a microfiber cloth and apply a new screen protector or clean the case if necessary. This will help maintain the touch sensitivity and usability of your device.
Update your iPhone software
Keeping your iPhone software up to date is essential for optimal performance and to resolve any software-related issues, including touch screen problems. Apple regularly releases software updates that include bug fixes, improvements, and enhancements. Follow these steps to update your iPhone software:
1. Connect your iPhone to Wi-Fi:
Before starting the update process, ensure that your iPhone is connected to a stable Wi-Fi network. This step is important to avoid any potential interruptions during the update.
2. Go to Settings:
From your iPhone’s home screen, tap on the “Settings” app. It can usually be found on the first page or in a folder labeled “Utilities.”
3. Select General:
In the Settings menu, scroll down and tap on “General” to access the general settings of your iPhone.
4. Tap on Software Update:
Within the General settings, look for “Software Update” and tap on it. Your iPhone will then check for any available updates.
5. Install the update:
If an update is available, you will see a message indicating the availability of the update. Tap on “Download and Install” to start the update process. Make sure your iPhone is connected to a power source and has sufficient battery life to complete the update. You may be prompted to enter your passcode to proceed with the installation.
6. Wait for the update to complete:
Once the update process begins, your iPhone will download the necessary files and install the update. This process may take some time, so it’s important to have patience and refrain from interrupting the update.
7. Restart your iPhone:
After the update is successfully installed, it’s recommended to restart your iPhone. This helps ensure that any changes made during the update are fully applied and can potentially resolve any lingering software issues.
By regularly updating your iPhone software, you not only keep your device secure but also ensure that any software-related touch screen issues are addressed. If the touch screen problem persists even after updating your iPhone software, you may need to seek further assistance from Apple Support or visit an authorized service center.
In conclusion, dealing with a non-responsive touch screen on your iPhone can be frustrating, but there are steps you can take to troubleshoot the issue. By following the tips outlined in this article, you can potentially resolve the problem and regain full functionality of your device. Remember to start with simple solutions like cleaning the screen and restarting your iPhone, then progress to more advanced troubleshooting steps like updating the software or resetting the device settings. If all else fails, don’t hesitate to reach out to Apple Support or visit an authorized service provider for further assistance. With a little patience and persistence, you can get your iPhone touch screen working again and continue enjoying the seamless user experience and features that make your device so valuable.
FAQs
1. Why is my iPhone touch screen not working?
There could be several reasons why your iPhone touch screen is not functioning properly. It could be due to a software glitch, a damaged screen, or a problem with the touch screen digitizer. It’s also possible that your iPhone has been exposed to water or moisture, which can interfere with its touch screen functionality.
2. What should I do if my iPhone touch screen is unresponsive?
If your iPhone touch screen is not responding to your touch, there are a few troubleshooting steps you can try. First, make sure your hands are clean and dry as dirt or moisture can interfere with the touch screen’s sensitivity. You can also try restarting your iPhone or performing a hard reset by holding down the power button and home button simultaneously until you see the Apple logo.
3. Can a cracked iPhone screen cause touch screen issues?
Yes, a cracked iPhone screen can cause touch screen problems. When the screen is cracked, it can damage the underlying touch screen digitizer, which is responsible for registering touch input. If you have a cracked screen, it’s recommended to get it repaired or replaced by an authorized Apple service provider to resolve any touch screen issues.
4. Is there a way to calibrate the iPhone touch screen?
Unlike some other devices, iPhones do not have a user-accessible touch screen calibration feature. However, software updates from Apple can sometimes include improvements to touch screen responsiveness and accuracy. Make sure your iPhone is running the latest iOS version by going to Settings > General > Software Update and installing any available updates.
5. What should I do if my iPhone touch screen is still not working?
If your iPhone touch screen is still not working after trying the troubleshooting steps mentioned above, it’s recommended to contact Apple Support or visit an authorized Apple service provider. They can diagnose the issue and provide you with appropriate solutions, such as a screen replacement or repair.
