To connect a Logitech wireless keyboard, you first need to identify its connection type: a USB receiver (Unifying or Logi Bolt) or Bluetooth-only. The quickest method is to plug the included USB receiver into your computer, then use Logi Options+ to pair the keyboard. Below are the exact steps for each connection type, plus troubleshooting fixes.
How to connect a Logitech wireless keyboard: identify your connection type
Before you begin, look at the back or underside of your keyboard and the USB receiver that came in the box. A Logitech Unifying receiver has a small orange sun or star icon printed on it. A Logi Bolt receiver has a yellow lightning bolt icon. If your keyboard has no USB receiver at all, it connects only via Bluetooth. Knowing which one you have determines the correct pairing process below. Logi Options+ is compatible with Windows 10 or later and macOS 12 or later.
Connect with a Logitech Unifying receiver
- Plug the Unifying receiver (orange sun icon) into an available USB-A port on your computer.
- Turn on your keyboard using its power switch.
- Open Logi Options+ (download it from Logitech's website if you don't have it). If you're on macOS High Sierra or earlier, you can use the older Logitech Unifying Software instead. Logitech Options (the older software) has reached its end of support; Logi Options+ is the recommended next-generation customization software.
- In Logi Options+, select Add Devices and choose Unifying.
- Follow the on-screen instructions to pair your keyboard. The receiver will detect it automatically within a few seconds.
A single Unifying Receiver can connect up to six compatible Logitech wireless keyboards and mice.
Connect with a Logi Bolt receiver
- Plug the Logi Bolt receiver (yellow lightning bolt icon) into a USB port on your computer.
- Open Logi Options+ and click Add Device.
- Choose the Logi Bolt receiver option from the list.
- Press and hold the connect button on your keyboard for about three seconds until its LED blinks rapidly.
- When the keyboard appears in Logi Options+, select CONNECT.
- Enter the verification code shown on your screen using your keyboard, then press Enter.
Logi Bolt is a secure, high-performance wireless technology designed for enterprise environments, and a single Logi Bolt Receiver can connect up to six compatible Logi Bolt wireless keyboards and mice. Logi Bolt devices can also be connected via Bluetooth, using Windows Swift Pair or standard Bluetooth settings.
Connect via Bluetooth
- Turn on your keyboard and put it into pairing mode by pressing and holding an Easy-Switch key (usually F1, F2, or F3) for about 3 seconds until its LED blinks rapidly.
- On Windows: Go to Settings > Devices > Bluetooth & other devices. Toggle Bluetooth ON, click Add Bluetooth or other device, select Bluetooth, then choose your keyboard from the list.
- On Mac: Go to System Settings > Bluetooth. Ensure Bluetooth is enabled, then click your keyboard in the list of available devices.
- If prompted, enter the pairing code shown on your screen using your keyboard and press Enter.
Logitech Bluetooth keyboards often have Easy-Switch buttons, so you can pair the same keyboard with a laptop, tablet, and phone, then switch between them instantly by pressing the corresponding key.
Troubleshooting Logitech keyboard connection issues
If your keyboard isn't connecting, start with these quick fixes:
- Check the batteries, Make sure they're inserted correctly and have enough charge. Replace them if they're low.
- Move closer to the receiver, Bring the keyboard within 1-2 feet of the receiver to rule out range issues.
- Re-pair using the correct software, Open Logi Options+, remove the keyboard from your device list, then add it again using the steps for your receiver type (Unifying or Bolt). For Bluetooth, forget the keyboard in your OS settings and pair it fresh.
- Try a different USB port, A faulty port can prevent detection. Swap to another port and test.
- Restart your computer, This clears temporary driver glitches that can block the connection.
If none of these work, test the keyboard on another computer. If it works there, the issue is with your original system's settings or hardware. If it still fails, contact Logitech support for further assistance.
For the wider topic, see wireless gaming controllers.
Frequently Asked Questions
Can I use Logi Options+ on a Mac running macOS 11 Big Sur?
No. Logi Options+ requires macOS 12 or later. If your Mac runs macOS High Sierra (10.13) through macOS 11 Big Sur, you must use the older Logitech Unifying Software instead for Unifying receiver pairing.
How many devices can I pair to a Logitech Bluetooth keyboard with Easy-Switch?
Easy-Switch keys let you pair the same keyboard with up to three devices, such as a laptop, tablet, and phone. Press and hold an Easy-Switch key to enter pairing mode for that slot, then switch between paired devices instantly by pressing the corresponding key.
Why does my Logitech keyboard ask for a verification code during Bolt pairing?
Logi Bolt uses a secure pairing process that requires you to type a verification code shown in Logi Options+ on your keyboard and press Enter. This confirms the physical keyboard matches the one being paired and is part of Bolt's enterprise-grade security design.
