Remove a Pelican Case from iPhone 10: The Safe Coin Method

To remove a Pelican case from an iPhone 10 (iPhone X), you will need a coin and a soft cloth. Because Pelican has not published official removal steps for the iPhone X, the safe method is adapted from the documented coin-slot process used for other Pelican models like the Voyager and Marine cases.

Before you remove a Pelican case from iPhone 10

There is no official iPhone X/10 removal instruction from Pelican, so this procedure adapts the documented coin-slot method used for other Pelican models. The only two things needed are a coin and a soft cloth. The soft cloth protects the screen and phone body during the process.

Locate the coin slot on the lower right corner

Find the small notch or slot on the lower right edge of the case. On documented Pelican Voyager and Marine cases, this is the starting point for unlatching the front cover from the rear cover. Look carefully along the lower right side; the slot may be subtle but is the intended release point.

Insert a coin and twist to release the front cover

Insert the edge of a coin into the slot. Gently twist the coin to pry the front cover away from the rear cover. Do not force it, if resistance is high, adjust the coin angle and twist again. The goal is to separate the latch, not to pry the entire case open at once.

Pull the front cover up and away around the edges

Once the latch releases, continue separating the front cover by working around the perimeter. Pull the front cover up and away slowly around the edges to fully detach it from the phone. Avoid jerking or pulling at an angle; slow, even pressure prevents damage to the phone or case.

Separate your iPhone 10 from the rear cover

If the case is a two-piece design, gently twist or lift the phone out of the remaining rear cover. Do not press down on the screen during this step. Pressing on the screen can cause pressure marks or damage to the display. Lift from the edges or corners of the phone for the safest removal. Do not press down on the screen during removal of the Marine case. For the Marine case, use a coin to separate the front cover and rear cover, then gently twist to separate the phone from the case.

Wipe down your phone and case

Use a soft, lint-free cloth to wipe the iPhone and the inside of the case. Removing dust and debris prevents scratches when reinstalling or storing the case. This is a useful step for cleaning phone cases and grips before putting the case back on or setting it aside.

Frequently Asked Questions

Will the coin scratch my Pelican case?

Using a coin with a smooth edge minimizes the risk of scratching the case. If you are concerned, wrap the coin's edge in the soft cloth before inserting it into the slot.

What if there is no coin slot on my Pelican case?

Some older or specific Pelican case models may have a latch or button instead of a coin slot. Check the perimeter of your case for a small release button or sliding latch. If no slot exists, consult the manual for that specific model.

Can I use a screwdriver instead of a coin?

A screwdriver can damage the plastic latch or scratch the case. A coin is recommended because its broad, smooth edge is less likely to gouge or crack the material.

Is it safe to remove the case every day?

Yes, the Pelican case is designed for regular removal. Repeated removal does not weaken the case or the phone as long as you follow the coin-slot method and do not force the covers apart.

What if the front cover still feels stuck after twisting the coin?

Stop and check that you have the correct slot. Sometimes the latch requires a second gentle twist. Never pry with excessive force, as this can crack the case rim.