How To Flash TWRP Using Fastboot Redmi 1S

Mobile Phone
how-to-flash-twrp-using-fastboot-redmi-1s
Source: Bsocialshine.com

Are you looking to enhance the functionality of your Redmi 1S smartphone? One popular method to achieve this is by flashing TWRP using Fastboot. TWRP (Team Win Recovery Project) is a custom recovery utility that allows you to perform advanced operations on your device, such as installing custom ROMs, creating system backups, and more. Fastboot is a tool that helps you communicate with your Android device’s bootloader to flash or modify system partitions. By combining the power of TWRP and Fastboot, you can unlock the true potential of your Redmi 1S and take your mobile experience to the next level. In this article, we will guide you through the step-by-step process of flashing TWRP on your Redmi 1S using Fastboot, so let’s dive in and get started.

Inside This Article

  1. Preparation
  2. Unlocking Bootloader
  3. Downloading TWRP Recovery
  4. Flashing TWRP Recovery
  5. Conclusion
  6. FAQs

Preparation

Before you proceed with flashing TWRP using Fastboot on your Redmi 1S, it is important to make sure you have everything you need for a successful and smooth installation. This section will guide you through the necessary steps to prepare your device and computer.

Here are the key steps for preparation:

  1. Backup your data: It is always recommended to back up all your important data before making any changes to your device. Flashing TWRP involves modifying system files, and it’s better to be safe than sorry. Use a reliable backup method to create a copy of your photos, videos, contacts, and other important files.
  2. Charge your device: Ensure that your Redmi 1S has an adequate battery level to avoid any interruptions during the flashing process. We suggest charging it to at least 70% to minimize the risk of your device running out of power during the installation.
  3. Install ADB and Fastboot drivers: To use Fastboot commands, you need to have ADB (Android Debug Bridge) and Fastboot drivers installed on your computer. These drivers allow your computer to communicate with your Redmi 1S. You can download the ADB and Fastboot drivers from the official Android developer website or other trusted sources.
  4. Enable USB debugging: USB debugging is a developer option that allows your device to connect to a computer and execute commands. To enable USB debugging on your Redmi 1S, go to “Settings” > “About phone” > “MIUI version” and tap on it several times until you see a message that says “You are now a developer.” Then, go back to “Settings” > “Additional settings” > “Developer options” and enable USB debugging.
  5. Install the proper USB drivers: To establish a connection between your Redmi 1S and your computer, you need to have the appropriate USB drivers installed. These drivers vary depending on your computer’s operating system. You can download and install the USB drivers from the official Xiaomi website or other reliable sources.

By following these preparation steps, you will be ready to move on to the next phases of flashing TWRP using Fastboot on your Redmi 1S. These steps ensure that your device is protected, charged, and equipped with the necessary tools to safely and successfully complete the installation process.

Unlocking Bootloader

Unlocking the bootloader is a crucial step in the process of flashing TWRP recovery on your Redmi 1S. By unlocking the bootloader, you gain complete control over your device and allow for the installation of custom recoveries and custom ROMs.

Before you begin, it is important to note that unlocking the bootloader will erase all data on your device. Make sure to back up any important files and settings before proceeding.

To unlock the bootloader on your Redmi 1S, follow these steps:

  1. Enable Developer Options on your device by going to Settings, tapping on About Phone, and then tapping on MIUI version multiple times until you see the message “You are now a developer!”
  2. Go back to the Settings menu and tap on Additional Settings.
  3. Scroll down and select Developer options.
  4. Enable OEM unlocking and USB debugging.
  5. Download and install the ADB and Fastboot tools on your computer.
  6. Connect your Redmi 1S to your computer using a USB cable.
  7. Open a command prompt or terminal window on your computer and navigate to the folder where the ADB and Fastboot tools are installed.
  8. Type the following command to boot your Redmi 1S into fastboot mode: adb reboot bootloader
  9. Once in fastboot mode, type the following command to check if your device is detected by the computer: fastboot devices
  10. If your device is detected, type the following command to unlock the bootloader: fastboot oem unlock
  11. Follow the on-screen instructions on your Redmi 1S to confirm the bootloader unlock.
  12. After the bootloader is unlocked, your device will automatically reboot.

That’s it! You have successfully unlocked the bootloader on your Redmi 1S. Now you can proceed to the next step of flashing TWRP recovery.

Downloading TWRP Recovery

Before you can flash TWRP recovery on your Redmi 1S using Fastboot, you need to download the TWRP recovery image file. Here’s how you can do it:

  1. Open your web browser and navigate to the official TWRP website (twrp.me).
  2. On the TWRP homepage, click on the “Devices” tab located in the top navigation menu.
  3. Scroll down the list of devices and locate “Redmi 1S” or search for it using the search bar.
  4. Click on “Redmi 1S” to access the TWRP recovery page specific to your device.
  5. Now, look for the “Download Links” section on the TWRP recovery page.
  6. Under “Download Links,” you will find the available TWRP recovery versions for your Redmi 1S. Choose the latest version compatible with your device.
  7. Click on the download link to start the download process.
  8. Once the download is complete, you will have the TWRP recovery image file in your downloads folder.

It is important to download the correct TWRP recovery image file for your Redmi 1S to ensure compatibility and avoid any potential issues during the flashing process.

Remember to keep the downloaded TWRP recovery image file in a safe and easily accessible location on your computer, as you will need it in the next steps of flashing TWRP using Fastboot.

Flashing TWRP Recovery

Flashing TWRP (Team Win Recovery Project) recovery on your Redmi 1S is a great way to unlock the full potential of your device. TWRP recovery provides a touch-enabled interface that allows you to install custom ROMs, root your phone, create backups, and perform other advanced tasks that are not possible with the stock recovery.

Before flashing TWRP recovery, make sure your Redmi 1S is already unlocked and you have successfully downloaded the TWRP recovery image file on your computer. Once you have all the necessary preparations, follow the steps below to flash TWRP recovery using Fastboot:

  1. Power off your Redmi 1S completely.
  2. Boot your Redmi 1S into Fastboot mode by holding the Volume Down button and the Power button simultaneously.
  3. Connect your Redmi 1S to your computer using a USB cable.
  4. Open a command prompt or terminal window on your computer and navigate to the folder where you have downloaded the TWRP recovery image.
  5. Type the following command in the command prompt/terminal window:

fastboot flash recovery twrp.img

Replace twrp.img with the actual name of the TWRP recovery image file you have downloaded.

  1. Press Enter to execute the command, and wait for the flashing process to complete.
  2. Once the flashing process is complete, type the following command to reboot your Redmi 1S:

fastboot reboot

Your Redmi 1S will now reboot with the newly flashed TWRP recovery. You can access TWRP recovery by booting your device into recovery mode (usually by holding the Volume Up button and the Power button simultaneously).

It is important to note that flashing TWRP recovery voids the warranty of your device, and there is always a risk involved with modifying your device’s software. Make sure to follow the instructions carefully and proceed at your own risk.

Conclusion

In conclusion, flashing TWRP using Fastboot on the Redmi 1S is a straightforward and effective way to unlock the full potential of your device. With TWRP custom recovery installed, you can easily perform advanced tasks such as flashing custom ROMs, creating backups, and installing third-party mods and tweaks. This process not only gives you more control over your device but also opens up a world of possibilities for customization and optimization.

Remember to follow the steps carefully and always ensure that you have the correct files and tools before proceeding with the flashing process. It is also recommended to take a backup of your data to avoid any potential loss during the flashing process.

With TWRP and Fastboot, you can unleash the true power of your Redmi 1S and enjoy a personalized and optimized mobile experience. So, go ahead and give it a try, and get ready to take your device to the next level!

FAQs

FAQ 1: What is TWRP recovery?
TWRP stands for Team Win Recovery Project. It is a custom recovery software that allows users to install custom ROMs, create backups, and perform various system-level tasks on their Android devices. TWRP is known for its user-friendly interface and extensive features, making it a popular choice among advanced Android users.

FAQ 2: Why would I want to flash TWRP using Fastboot?
Flashing TWRP using Fastboot provides a straightforward and reliable method to install a custom recovery on your Android device. Fastboot is a powerful tool that allows you to flash various partitions on your device’s firmware. By using Fastboot to flash TWRP, you can gain access to a multitude of additional features and customization options for your device.

FAQ 3: How do I enter Fastboot mode on my Redmi 1S?
To enter Fastboot mode on your Redmi 1S, follow these steps:

  1. Switch off your device.
  2. Press and hold the Volume Down button and the Power button simultaneously until the Fastboot logo appears on the screen.
  3. Your Redmi 1S is now in Fastboot mode.

FAQ 4: What precautions should I take before flashing TWRP?
Before flashing TWRP, it is crucial to take the following precautions:

  1. Backup your data: Flashing a custom recovery may result in data loss. It is recommended to back up your important files, contacts, and apps before proceeding.
  2. Ensure sufficient battery: Make sure your device has enough battery level to complete the flashing process without interruption. A minimum of 50% battery is usually recommended.
  3. Download the correct TWRP image: Ensure that you have downloaded the appropriate TWRP image file for your specific device model.

FAQ 5: How do I flash TWRP using Fastboot on my Redmi 1S?
To flash TWRP using Fastboot on your Redmi 1S, follow these steps:

  1. Ensure you have the necessary drivers installed on your computer.
  2. Download the TWRP image file for your Redmi 1S model.
  3. Enable USB debugging on your device.
  4. Connect your Redmi 1S to your computer via USB cable.
  5. Open a Command Prompt or Terminal window on your computer and navigate to the folder where the TWRP image file is located.
  6. Type the command “fastboot devices” to ensure your device is recognized by Fastboot.
  7. Type the command “fastboot flash recovery .img” (replace with the actual name of the TWRP image file).
  8. Once the flashing process is complete, type “fastboot reboot” to reboot your device.