How To Turn On Ringer On IPhone 10


If you've ever found yourself in a situation where you couldn't hear your iPhone 10 ringing, you're not alone. The ringer on an iPhone 10 can be a bit tricky to navigate, especially if you're new to the device. But fear not! In this article, we'll delve into the ins and outs of turning on the ringer on your iPhone 10. Whether you're struggling to locate the physical switch or you simply want to ensure that your ringer is activated, we've got you covered. By the end of this guide, you'll be equipped with the knowledge to master your iPhone 10's ringer settings and never miss an important call again. So, let's dive in and unravel the mystery of how to turn on the ringer on your iPhone 10! Remember, it's all about staying connected, and we're here to make that process as seamless as possible.

Inside This Article

  1. Checking the Ringer Switch
  2. Adjusting Ringer Volume
  3. Using the Settings Menu
  4. Using the Control Center
  5. Conclusion
  6. FAQs

Checking the Ringer Switch

Before adjusting the ringer volume on your iPhone 10, it’s crucial to ensure that the ringer switch is set to the desired position. This physical switch, located on the left side of the device, controls whether the iPhone is in silent or ringer mode. When the switch is pushed towards the back of the phone, the ringer is muted, indicated by an orange marker. Conversely, when the switch is in the forward position, the ringer is activated, allowing you to receive audible notifications.

It’s important to remember that the ringer switch setting overrides the volume settings, so even if the volume is turned up, if the switch is set to silent, the phone will not audibly ring or alert you to notifications. By quickly glancing at the ringer switch, you can easily determine whether your iPhone is set to ring or silent mode, ensuring you don’t miss any important calls or messages.

Adjusting Ringer Volume

Adjusting the ringer volume on your iPhone 10 is a straightforward process that allows you to customize the sound level to your preference. Whether you want to ensure you hear incoming calls and notifications clearly or minimize disruptions in quiet environments, the ringer volume settings offer flexibility and control.

To adjust the ringer volume, simply locate the volume buttons on the side of your iPhone 10. These buttons are positioned to the left of the device, just above the ringer switch. By pressing the top button, you can increase the ringer volume, while pressing the bottom button decreases the volume. As you adjust the volume, a corresponding indicator will appear on the screen, providing a visual representation of the current ringer volume level.

It’s important to note that adjusting the ringer volume does not impact the volume for media playback or alarms on your iPhone 10. This distinction allows you to tailor the ringer volume specifically to your incoming call and notification needs without altering other audio settings. By easily manipulating the volume buttons, you can ensure that you never miss an important call or alert while maintaining control over your device’s sound output.

Using the Settings Menu

Another way to turn on the ringer on your iPhone 10 is by accessing the Settings menu. To do this, simply unlock your device and locate the Settings app on the home screen. It’s represented by a gear icon and is typically found in the first few rows of apps.

Once you’ve opened the Settings app, scroll down and tap on “Sounds & Haptics.” This will take you to a screen where you can adjust various audio settings on your iPhone, including the ringer volume and vibration options.

Within the “Sounds & Haptics” menu, you’ll find a slider for “Ringer and Alerts.” Simply adjust the slider to increase the volume and turn on the ringer. You can also toggle on the “Change with Buttons” option to allow the physical volume buttons on the side of your iPhone to control the ringer volume.

After adjusting the ringer volume to your preference, you can exit the Settings app and test the ringer by receiving a test call or sending yourself a text message. If you hear the ringer sound, then you’ve successfully turned on the ringer using the Settings menu on your iPhone 10.

Using the Control Center

Another quick way to turn on the ringer on your iPhone 10 is by using the Control Center. To access the Control Center, simply swipe down from the top-right corner of the screen. This will reveal a panel with various settings and shortcuts, including the ringer controls.

Once the Control Center is open, look for the bell icon, which represents the ringer. If the bell icon has a line through it, it means the ringer is currently off. Tap the bell icon to turn on the ringer, and you should see the line through the icon disappear, indicating that the ringer is now active.

Using the Control Center is a convenient method for quickly adjusting the ringer status without having to navigate through multiple menus. It’s especially handy when you need to turn on the ringer in a hurry, such as when you’re expecting an important call or need to be alerted to notifications.


Ensuring that the ringer is turned on for your iPhone 10 is essential for staying connected and being alerted to important calls and notifications. By following the simple steps outlined in this guide, you can easily enable the ringer and customize the settings to suit your preferences. Whether it’s for work, personal use, or emergencies, having a functional ringer is crucial for seamless communication. With these insights, you can now navigate your iPhone 10 with confidence, knowing how to effortlessly activate the ringer and manage its settings. Stay connected, stay informed, and make the most of your iPhone 10’s capabilities with the ringer turned on.


**Q: How do I turn on the ringer on my iPhone 10?**
A: To turn on the ringer on your iPhone 10, simply toggle the switch on the left side of the device towards the screen.

Q: Why is my iPhone 10 not ringing?
A: If your iPhone 10 is not ringing, check if the ringer switch on the left side of the device is turned on. Also, ensure that the volume is not muted or too low.

Q: How can I troubleshoot if my iPhone 10 is not ringing?
A: If your iPhone 10 is not ringing, try restarting the device, checking the ringer switch, adjusting the volume, and ensuring that Do Not Disturb mode is not activated.

Q: Can I customize the ringer settings on my iPhone 10?
A: Yes, you can customize the ringer settings on your iPhone 10 by adjusting the volume, choosing a specific ringtone, and setting vibration preferences.

Q: Is there a way to schedule the ringer on my iPhone 10?
A: While the iPhone 10 does not have a built-in feature to schedule the ringer, you can use the Do Not Disturb mode to automatically silence calls and notifications during specific times.