To mount a GoPro to a selfie stick, use the camera's built-in mounting feet or the 1/4-20 standard tripod screw found on the HERO12 Black.
How to mount a GoPro to a selfie stick
Mounting a GoPro to a selfie stick is a straightforward process that uses the camera's existing hardware. GoPro states that selfie sticks are compatible with GoPro cameras by using the built-in mounting feet or the 1/4-20 standard tripod mounting threads on the HERO12 Black. To understand how do you use a selfie stick effectively, you first need a secure physical connection between the camera and the stick. The following steps cover both attachment methods.
Locate your GoPro's mounting point
Every GoPro camera has built-in mounting feet on the bottom of the camera body. These are the two small, hinged tabs that fold out from the camera's base. If you own a HERO12 Black, you also have a 1/4-20 threaded hole located between those mounting feet, which allows you to attach the camera directly to a standard tripod screw. The HERO12 Black is specifically called out for 1/4-20 tripod thread compatibility. Identify which mounting point you will use based on the type of selfie stick you have.
Attach the GoPro to the stick's mount
There are two primary ways to attach your GoPro to a selfie stick, depending on the stick's design.
Using the built-in mounting feet
- GoPro says to use the built-in mounting feet or a compatible mounting buckle provided with the selfie stick. Locate the compatible mounting buckle that came with your selfie stick. This is a plastic or metal piece with a slot that matches the shape of your GoPro's mounting feet.
- Align the GoPro's mounting feet with the slot on the buckle.
- Slide the camera into the buckle until you hear an audible click. This click indicates the camera is locked into place.
Using the 1/4-20 tripod mount (HERO12 Black only)
- If your selfie stick has a standard 1/4-20 tripod screw, locate the threaded hole on the bottom of your HERO12 Black.
- Screw the camera directly onto the selfie stick's tripod screw by turning the camera clockwise until it is snug.
Tighten and secure the connection
After attaching the GoPro, secure the connection by tightening any thumbscrew or locking mechanism on the selfie stick's mount. For buckle-style mounts, ensure the locking tab is fully engaged. For tripod screw mounts, give the screw a final quarter-turn to ensure it is tight. Before using the stick, perform a gentle shake test: hold the selfie stick by the handle and give it a light shake. If the camera moves or wobbles, re-tighten the connection. A secure mount will have no play or movement.
Adjust the angle for your shot
Once the GoPro is securely mounted, you can adjust the camera angle. Locate the joint or pivot point on the selfie stick that controls the camera's tilt. Loosen this joint, tilt the GoPro to your desired angle, then re-tighten the joint firmly. Most selfie sticks allow for tilting up and down, and some also allow rotation. Check the stability of the angle by gently moving the stick before you start recording.
Frequently Asked Questions
Can I use any selfie stick with my GoPro?
Most selfie sticks are compatible with GoPro cameras if they have a standard 1/4-20 tripod screw or a compatible mounting buckle. For older GoPro models without a tripod thread, you need a selfie stick that includes a GoPro-compatible buckle or an adapter.
What if my GoPro doesn't click into the mount?
If you do not hear a click when sliding the camera into the buckle, the mounting feet may not be fully aligned. Remove the camera, check that the feet are fully extended and clean, and try again. If it still does not click, the buckle may be incompatible with your specific GoPro model.
How tight should the tripod screw be?
Tighten the 1/4-20 screw until it is snug and the camera does not rotate freely. Do not overtighten, as this could strip the threads. A firm hand-tighten is sufficient for most uses.
Can I mount a GoPro to a selfie stick underwater?
Yes, but you must use a waterproof housing for your GoPro if the selfie stick is not waterproof.
