The Redmi 4X is a popular smartphone model with a dedicated following due to its impressive features and performance. However, some users might want to unlock the full potential of their device by rooting it. Rooting allows you to gain administrative privileges on your Android device, giving you complete control over the operating system.
In this article, we will guide you on how to root your Redmi 4X using TWRP (TeamWin Recovery Project). TWRP is a powerful custom recovery tool that will enable you to install custom ROMs, modify system settings, and perform other advanced tasks on your device.
By following our step-by-step tutorial, you can safely and easily root your Redmi 4X, unlocking a whole new world of customization and possibilities. So let’s dive in and explore how to root your Redmi 4X with TWRP!
Inside This Article
- Pre-Requisites: Unlocking the bootloader and Installing ADB and Fastboot drivers
- Step 1: Downloading Required Files
- Step 2: Enabling USB Debugging- Enabling Developer Options- Enabling USB Debugging mode
- Step 3: Booting Redmi 4X into TWRP Recovery- Booting into Fastboot mode- Flashing TWRP Recovery via Fastboot
- Step 4: Rooting Redmi 4X using TWRP – Installing Magisk via TWRP Recovery – Rebooting the device into the rooted system
- Conclusion
- FAQs
Pre-Requisites: Unlocking the bootloader and Installing ADB and Fastboot drivers
Before you can root your Redmi 4X and install TWRP recovery, there are a few pre-requisites that you need to take care of. These include unlocking the bootloader and installing ADB and Fastboot drivers on your computer. Let’s dive into each of these steps to get your device ready for the rooting process.
Unlocking the bootloader:
Unlocking the bootloader is the first step in gaining root access and installing custom recovery like TWRP on your Redmi 4X. However, please note that the process of unlocking the bootloader may vary depending on the manufacturer and the specific device model. Make sure to back up all your data as this process will wipe your device.
To unlock the bootloader on your Redmi 4X, you need to follow the official procedure specified by Xiaomi. Visit the Xiaomi website and search for the official bootloader unlocking tool. Download and install it on your computer. Then, follow the instructions provided by the tool to unlock the bootloader. This typically involves enabling developer options, enabling USB debugging, and connecting your device to the computer in bootloader/fastboot mode.
Installing ADB and Fastboot drivers:
ADB (Android Debug Bridge) and Fastboot are essential tools for communicating with and controlling Android devices from a computer. To install ADB and Fastboot drivers on your computer, follow these steps:
- Download and install the Android SDK Platform Tools from the official Android developer website.
- Once the SDK Platform Tools are installed, open the command prompt or terminal window on your computer.
- Connect your Redmi 4X to the computer using a USB cable.
- In the command prompt or terminal window, navigate to the directory where the Android SDK Platform Tools are installed.
- Enter the command “adb devices” to check if your device is recognized by the computer. You should see your device listed with a device ID.
- Now, you have successfully installed ADB and Fastboot drivers on your computer.
Having unlocked the bootloader and installed ADB and Fastboot drivers, you’re now ready to move on to the next steps in the rooting process. In the next section, we will guide you through the process of downloading the required files for rooting your Redmi 4X and installing TWRP recovery.
Step 1: Downloading Required Files
Before you can root your Redmi 4X with TWRP (Team Win Recovery Project) and install Magisk, you’ll need to download the necessary files. Here’s a step-by-step guide to help you with the process.
Downloading TWRP Recovery for Redmi 4X
The first file you need to download is the TWRP Recovery specifically designed for the Redmi 4X. TWRP Recovery is a custom recovery image that allows you to flash custom ROMs, take backups, and perform other advanced functions on your device.
To download TWRP Recovery for the Redmi 4X, follow these steps:
- Open your preferred web browser and navigate to the official TWRP website.
- Use the search function on the website to find the TWRP Recovery specifically designed for the Redmi 4X.
- Once you’ve found the appropriate TWRP Recovery file, click on the download link to start the download process.
Downloading Magisk Manager APK
Magisk is a powerful tool that not only allows you to root your Android device but also provides systemless root functionality. It allows you to enjoy the benefits of root access without modifying the system partition, which means you can still receive OTA (Over-The-Air) updates and use apps that usually don’t work on rooted devices.
To download the Magisk Manager APK, follow these steps:
- Open your web browser and navigate to the official Magisk GitHub page.
- Scroll down until you find the Magisk Manager section.
- Click on the “Assets” dropdown to expand it.
- Look for the latest version of the Magisk Manager APK and click on it to start the download.
Once both the TWRP Recovery and Magisk Manager APK files have finished downloading, you can proceed to the next steps to root your Redmi 4X with TWRP.
Step 2: Enabling USB Debugging- Enabling Developer Options- Enabling USB Debugging mode
Enabling USB Debugging is a crucial step in the process of rooting your Redmi 4X device with TWRP. USB Debugging allows your device to communicate with your computer and allows for advanced tasks to be performed via ADB (Android Debug Bridge).
To enable USB Debugging, you need to first enable Developer Options on your Redmi 4X. Here is how you can do it:
- Go to the “Settings” menu on your Redmi 4X.
- Scroll down and tap on “About phone.”
- Locate the “MIUI version” and tap on it seven times. You will see a toast notification saying “You are now a developer!”
Once you have enabled Developer Options, you can proceed to enable USB Debugging mode:
- Go back to the main “Settings” menu.
- Scroll down and tap on “Additional settings.”
- Tap on “Developer options.”
- Toggle the switch to enable “USB Debugging.
- You might see a confirmation message, just tap on “OK” to proceed.
With USB Debugging enabled, you are now ready to connect your Redmi 4X to your computer and perform advanced tasks using ADB commands. This is an essential step in the process of rooting your device with TWRP.
Step 3: Booting Redmi 4X into TWRP Recovery- Booting into Fastboot mode- Flashing TWRP Recovery via Fastboot
Once you have successfully unlocked the bootloader of your Redmi 4X and installed ADB and Fastboot drivers on your computer, you are now ready to boot your device into TWRP recovery. The TWRP recovery is a custom recovery that allows you to perform various advanced functions on your smartphone, including flashing custom ROMs, taking backups, and much more.
To start the process, follow the steps below:
1. Booting into Fastboot mode:
- Switch off your Redmi 4X by pressing and holding the power button.
- Once the device is completely turned off, press and hold the Volume Down button and the Power button simultaneously.
- Continue holding both buttons until you see the Fastboot logo on the screen. This indicates that your device has successfully entered Fastboot mode.
2. Flashing TWRP Recovery via Fastboot:
- Connect your Redmi 4X to your computer using a USB cable.
- Open a command prompt or terminal window on your computer and navigate to the folder where the TWRP Recovery image is saved.
- Type the following command in the command prompt or terminal window to check if your device is connected properly:
fastboot devices - If your device is detected, you should see a device ID in the list of connected devices.
- Now, enter the following command to flash the TWRP Recovery image onto your Redmi 4X:
fastboot flash recovery twrp.img
Replace “twrp.img” with the actual name of the TWRP Recovery image file you downloaded in Step 1. - Wait for the flashing process to complete. Once done, enter the following command to reboot your device:
fastboot reboot
After executing the above steps, your Redmi 4X will reboot into TWRP recovery mode. You are now ready to perform various advanced functions on your device, including rooting with Magisk, flashing custom ROMs, and more.
Step 4: Rooting Redmi 4X using TWRP – Installing Magisk via TWRP Recovery – Rebooting the device into the rooted system
Now that you have successfully booted your Redmi 4X into TWRP Recovery, it’s time to proceed with the next steps to root your device. In this step, we will guide you on how to install Magisk, the most popular root solution, using TWRP Recovery.
1. From the TWRP main menu, tap on the “Install” button. This will allow you to install various files on your device.
2. Navigate to the folder where you have downloaded the Magisk Manager APK and select it.
3. Swipe the slider to the right to confirm the installation process. This will initiate the installation of Magisk on your Redmi 4X.
4. Once the installation is complete, you will see a “Reboot System” button. Tap on it to reboot your device.
5. After your device reboots, you will find the Magisk Manager app in your app drawer. This confirms that your Redmi 4X is now successfully rooted using TWRP Recovery and Magisk.
Congratulations! You have successfully rooted your Redmi 4X using TWRP Recovery and Magisk. Now, you can enjoy the benefits of a rooted device, such as installing custom ROMs, flashing mods, and accessing additional features.
It is important to note that rooting your device voids the warranty, and improper handling or use of root privileges can lead to potential risks. Therefore, make sure to research and understand the risks involved before proceeding with any modifications.
Now that your Redmi 4X is rooted, be sure to explore the various possibilities that rooting opens up. You can customize your device to your liking, remove bloatware, and experiment with different tools and applications to enhance your Android experience.
After going through the step-by-step guide on how to root Redmi 4X with TWRP, it is clear that rooting your device can unlock a whole new level of customization and control. By rooting your Redmi 4X, you can install custom ROMs, remove bloatware, and even tweak performance settings. TWRP recovery makes the process of rooting easier and safer.
However, it’s important to note that rooting your device voids the warranty and carries certain risks. It’s crucial to follow the instructions carefully and understand the potential consequences before proceeding. Make sure to back up your data and proceed with caution.
In conclusion, if you are comfortable with the technical aspects and willing to take on the risks, rooting your Redmi 4X with TWRP can be a game changer. Enjoy the benefits of customized software, enhanced performance, and complete control over your device.
FAQs
1. How do I root my Redmi 4X?
Rooting your Redmi 4X is a process that allows you to gain administrative access to your device, giving you more control and customization options. To root your Redmi 4X with TWRP, follow these steps:
– Unlock the bootloader of your Redmi 4X by enabling Developer Options, enabling OEM unlocking, and using the Mi Unlock Tool.
– Download the TWRP recovery image for Redmi 4X and transfer it to your device.
– Boot your Redmi 4X into Fastboot mode by powering it off, then holding the Volume Down and Power buttons simultaneously.
– Connect your Redmi 4X to your computer and open a command prompt or terminal window.
– Enter the following command: `fastboot flash recovery
– Once the flashing process is complete, use the Volume keys to navigate and the Power button to select “Recovery mode” in the Fastboot menu.
– Your Redmi 4X will now boot into TWRP. From here, you can choose to install SuperSU or Magisk to gain root access.
2. Is rooting my Redmi 4X safe?
Rooting your Redmi 4X comes with some risks, as it involves modifying the system files and granting administrative access. If not done correctly, it could potentially lead to bricking your device or voiding your warranty. It’s important to follow the rooting process carefully and ensure you have a solid understanding of what you’re doing. It is also recommended to backup your data before proceeding.
3. Will rooting my Redmi 4X void my warranty?
Rooting your Redmi 4X may void the warranty provided by the manufacturer or carrier. As you are making modifications to the system files and software, it is possible for them to detect the rooted state of your device. It is always advisable to check the warranty terms and conditions before proceeding with rooting.
4. Can I unroot my Redmi 4X after rooting?
Yes, it is possible to unroot your Redmi 4X after rooting. You can simply use the SuperSU app or Magisk Manager to unroot your device. Alternatively, you can flash the stock firmware using TWRP recovery to completely remove root access and revert your device to its original state.
5. What are the benefits of rooting my Redmi 4X?
Rooting your Redmi 4X opens up a world of possibilities for customization and optimization. Some key benefits include:
– Installing custom ROMs and kernels to enhance performance and battery life.
– Removing bloatware and unwanted system apps.
– Accessing and modifying system files for advanced customization.
– Using root-only apps and features that require administrative access.
– Taking full backups of your device using third-party apps.
– Overclocking the CPU for better performance (with caution).
– Applying system-wide ad-blocking.
However, it’s important to note that rooting does come with risks, and it’s essential to proceed with caution and only make changes that you fully understand.
