To connect Brookstone wireless earbuds to iPhone, put the earbuds in pairing mode (the method varies by model), then go to Settings > Bluetooth on your iPhone, turn Bluetooth on, and tap the earbud name when it appears in the device list. If a PIN is requested, enter 0000.
Identify your Brookstone earbud model
Because the pairing name and steps differ by model, first find which Brookstone earbuds you own. Common model names and their Bluetooth listing names include:
- Brookstone True Wireless Bluetooth Earbuds, appears as BRKSTN EB or BT-H31
- Brookstone BKH650 True Wireless Earbuds, appears as Brookstone BKH650
- Brookstone Big Blue True Wireless Earbuds, appears as BIG BLUE or Big Blue Color Earbuds
- Brookstone AirPhones, appears as Brookstone AirPhones
Check your earbud’s charging case, the original packaging, or the user manual to confirm which model you have. Knowing the exact name helps you spot it quickly in your iPhone’s Bluetooth list.
Put your Brookstone earbuds in pairing mode
The method for entering pairing mode depends on your specific Brookstone model. Follow the verified steps below for your earbuds:
- Brookstone True Wireless Bluetooth Earbuds (BRKSTN EB): Some models require the earbuds to be powered off before entering pairing mode. Press and hold the power button for 7-10 seconds until the indicator light flashes to enter pairing mode.
- Brookstone BKH650 True Wireless Earbuds: Remove both earbuds from the charging case. They automatically enter Bluetooth pairing mode the first time. After the earbuds link to each other, one LED quickly flashes white and the other slowly flashes white.
- Brookstone Big Blue True Wireless Earbuds: Remove both earbuds from the case. They automatically enter pairing mode.
- Brookstone AirPhones: Open the charging case. The earbuds automatically enter pairing mode.
Keep the earbuds within 33 feet of your iPhone during the pairing process.
Connect the earbuds in your iPhone's Bluetooth settings
- On your iPhone, open Settings and tap Bluetooth.
- Turn Bluetooth on (the switch turns green).
- Wait for your earbud model name to appear under “Other Devices” or “My Devices.”
- Tap the earbud name (for example, BRKSTN EB, Brookstone BKH650, BIG BLUE, or Brookstone AirPhones).
- If prompted for a PIN or passcode, enter 0000.
- Your iPhone confirms the connection, and the earbuds are ready to use.
Pairing wireless earbuds with your iPhone is a one-time setup; after the initial connection, they usually reconnect automatically when taken out of the case.
Troubleshooting connection problems
If your Brookstone earbuds do not connect or appear in the Bluetooth list, try these fixes:
- Reset the earbuds: Place both earbuds back in the charging case, close the lid, wait a few seconds, then remove them again and repeat the pairing steps.
- Forget the device: In your iPhone’s Bluetooth settings, tap the “i” icon next to the earbud name, then tap Forget This Device. Restart the earbuds in pairing mode and connect fresh.
- Check the charge: Ensure the earbuds and the charging case have enough battery. Low battery can prevent the earbuds from entering pairing mode or being detected.
- Stay within range: Keep your iPhone within 33 feet of the earbuds during pairing. Move closer if the connection fails.
Frequently Asked Questions
Why do my Brookstone earbuds keep disconnecting from my iPhone?
Interference from other Bluetooth devices or physical obstructions can cause dropouts. Move closer to your iPhone and away from other wireless devices. Also, ensure the earbuds are fully charged.
Can I use only one Brookstone earbud at a time?
Yes. Most Brookstone true wireless models allow single-earbud use. Remove one earbud from the case and it will connect independently. The other earbud remains available for later pairing.
How do I reset my Brookstone earbuds to factory settings?
Then remove them and re-enter pairing mode. For some models, this clears previous pairings and starts fresh.
Do Brookstone earbuds work with Android phones too?
Yes. The same general Bluetooth flow applies: open Bluetooth settings on the Android device, put the earbuds in pairing mode, and select the earbud name from the list. Some models may require tapping a SCAN button to refresh the device list.
For the wider topic, see pairing wireless earbuds.
