To connect hopper to wireless network, press and hold the Home button on your remote, then navigate to Settings > Internet > Wireless Setup. The entire process usually takes less than a minute and requires no special app.
Step-by-step guide to connect Hopper to wireless network
The on-device path is Home > Settings > Internet > Wireless Setup.
- Press and hold Home on your DISH remote.
- Select Settings.
- Select Internet.
- Select Wireless Setup.
- If the option appears, select Wi-Fi SETUP WIZARD.
- If shown, select Wi-Fi SETUP WIZARD.
- Choose your wireless network from the list.
- Select Next.
- Enter your wireless network password, paying careful attention to capitalization.
- Select Save.
Once saved, your Hopper will confirm the connection. You can now stream on-demand content and access apps without an Ethernet cable.
Troubleshooting connection problems
If you own a Hopper 1, verify that a Wi‑Fi adapter is installed, DISH states this model requires one for any wireless connection. Hopper 1 requires a Wi‑Fi adapter for wireless connection. When entering your password, double‑check every character’s capitalization, as an incorrect uppercase or lowercase letter is the most common reason the connection fails. No iPhone or Android app is documented for troubleshooting this setup.
Frequently asked questions
Do I need Ethernet?
Ethernet is the easiest way to get started, but Wi‑Fi is supported when you do not have an Ethernet cord nearby.
How long does it take?
DISH says the setup usually takes less than a minute from start to finish.
Is there a special app I need?
No. The official DISH steps for setting up wireless connections use only the on-screen menus on your Hopper, no iPhone, Android, or other app is required.
Can I make my wireless router faster for streaming?
If you want to make my wireless router faster, consider moving it closer to your Hopper or reducing interference from other devices. The Hopper itself does not have documented speed or range limits in DISH’s official pages.
What if I have a Hopper 1?
A Hopper 1 requires a Wi‑Fi adapter to connect wirelessly. Without it, you must use an Ethernet cable or install the adapter before following the steps above.
Related reading: How To Connect Envy 4500 Wireless.
