To pair Heyday wireless headphones, first charge them fully, then put them into pairing mode by turning them on and holding the power button until the indicator flashes. Once the headphones are in pairing mode, open the Bluetooth settings on your iPhone or Android device and select the Heyday device name from the list of available devices.
How to pair Heyday wireless headphones: The complete step-by-step pairing process
Charge the headphones first
Before using your Heyday wireless headphones for the first time, charge them fully using the included USB cable. A full charge ensures the pairing process is not interrupted by a low battery.
Enter pairing mode on the headphones
- Turn on the headphones using the power button.
- Press and hold the power button until the indicator light begins to flash. This flashing light confirms the headphones are in pairing mode and ready to connect.
For some Heyday earbuds, removing them from the charging case automatically powers them on and enters pairing mode, so no button holding is needed.
Connect via Bluetooth on iPhone
- Open Settings > Bluetooth.
- Turn Bluetooth on if it is off.
- Wait for the Heyday device name to appear under available devices, then tap its name to pair.
Some manuals say the indicator stops flashing or changes to a slow flash or solid light once pairing succeeds. The default pairing code or passkey is often 0000 or 1234 if prompted.
Connect via Bluetooth on Android
- Open Settings > Bluetooth or Connected devices > Pair new device (the exact path varies by Android version and manufacturer, but the key setting is Bluetooth).
- Turn Bluetooth on if it is off.
- Select the Heyday device name when it appears in the list.
Once pairing succeeds, the indicator light on the headphones typically stops flashing or changes to a slow flash or solid light.
Heyday device names in Bluetooth
When searching for your headphones in the Bluetooth menu, look for the specific model name. Depending on the model, the name may appear as “HEYDAY HEADPHONES 01,” “HEYDAY HEADPHONES 02,” “HEYDAY EARBUD 05,” “Heyday Headphones,” or “Heyday Earbuds.” Knowing these names helps you identify the correct device in a list of nearby Bluetooth devices.
Automatic pairing for Heyday earbuds
Some Heyday earbuds power on and enter pairing mode automatically when removed from the charging case. If Bluetooth is enabled on your phone or tablet, these earbuds automatically reconnect to the last paired device without any manual steps. This makes pairing true wireless earbuds quick and convenient for everyday use.
Troubleshooting Heyday headphone pairing
If pairing fails, start by turning Bluetooth off and on again on your phone, then retry pairing from the Bluetooth menu. If the device still does not appear, re-enter pairing mode by holding the power button until the light flashes again.
Frequently Asked Questions
Are Heyday wireless headphones compatible with all phones?
Yes, Heyday wireless headphones pair over Bluetooth with smartphones, tablets, laptops, computers, and other Bluetooth-enabled devices. No specific iPhone model, iOS version, or Android version is required.
Can I connect Heyday headphones to multiple devices at once?
Heyday wireless headphones can be paired with multiple devices, but they can only connect to one device at a time. To switch to a different device, disconnect from the current device first, then pair with the new one.
Do I need an app to use Heyday wireless headphones?
No official Heyday app, carrier app, or carrier-specific pairing method exists. The documented setup method is standard Bluetooth pairing directly on your phone or tablet.
Why won't my Heyday headphones appear in the Bluetooth list?
If the headphones do not appear, ensure they are in pairing mode (indicator flashing) and that Bluetooth is on and scanning on your phone. Turn Bluetooth off and on again, then re-enter pairing mode. If the issue persists, charge the headphones fully and try again.
