To connect canon mx922 wireless, press the Menu button on the printer’s control panel, use the arrow keys to highlight WLAN setup, then press OK. This is the official Canon-documented path for connecting your PIXMA MX922 to a home Wi‑Fi network.
Connect your Canon MX922 wireless, the official menu path
Canon’s official setup for the MX922 uses the printer’s built‑in control panel. Turn the printer on, then press Menu. Use the arrow keys to navigate to WLAN setup and press OK. The printer will search for available wireless networks. Select your network from the list, enter your Wi‑Fi password using the printer’s keypad, and press OK. Once connected, a confirmation message appears on the screen. This method works for any standard home router and is the primary path Canon documents for a wireless printer setup.
Connect using WPS if your router supports it
If your wireless router has a WPS (Wi‑Fi Protected Setup) button, you can use an even faster connection method. From the same WLAN setup menu, press OK, then follow the WPS prompts that appear on the printer’s display. Typically, the printer will ask you to press the WPS button on your router within two minutes. Once the printer detects the router, the connection completes automatically, no password entry is required. This is the alternative official wireless method Canon provides for the MX922.
What you need before you start
Canon’s support page lists three required items for a successful wireless connection:
- A Wi‑Fi enabled computer (or mobile device) that you will use to send print jobs.
- A wireless router broadcasting a 2.4 GHz network (the MX922 does not support 5 GHz bands according to Canon’s specifications).
- The wireless printer itself (the Canon PIXMA MX922).
Make sure your printer is turned on, within range of your router, and that you know your Wi‑Fi network name (SSID) and password before beginning.
What to do when the connection fails
If the wireless setup does not complete successfully, Canon’s documented troubleshooting path is to return to WLAN setup and retry either the standard menu method or the WPS route. Before retrying, perform these basic checks:
- Ensure your router is powered on and other devices can connect to it.
- Verify you are entering the correct Wi‑Fi password (check for typos and case‑sensitivity).
- Move the printer closer to the router to improve signal strength.
- Restart both the printer and your router, then attempt the connection again.
Frequently Asked Questions
How do I find the IP address of my Canon MX922 printer?
Print a network configuration page from the printer’s control panel. Press Menu, navigate to Device Settings, then LAN Settings, and select Print LAN Details. The IP address will be listed on the printed page.
Can I connect my Canon MX922 to multiple devices?
Yes. Once the printer is connected to your Wi‑Fi network, any computer, smartphone, or tablet on the same network can send print jobs to it. No additional setup is needed for each device beyond installing the printer driver.
What should I do if my Canon MX922 won’t connect after multiple attempts?
Then, reset the printer’s network settings by pressing Menu, selecting Device Settings, then LAN Settings, and choosing Reset LAN. After the reset, repeat the WLAN setup process from the beginning.
Can I connect my Canon MX922 to a mobile device?
For the wider topic, see wireless printer setup.
Related reading: How To Connect Laptop To Wireless Canon Printer, How To Set Up Canon Mx340 Wireless Printer, and How To Set Up Canon Pixma Mp495 Wireless Printer.
